Biography

Prof. Fehim Findik

Sakarya University, Turkey


Emailfindik@sakarya.edu.tr


Qualifications

1988 - 1992  Ph.D., Materials Science and Diploma of Imperial College (DIC), London University, England

1982 - 1984  M.Sc., Mechanical Engineering, Istanbul Technical University, Turkey

1977 - 1981  B.Sc., Mechanical Engineering, Istanbul Technical University, Turkey


Publications (selected)
  1. Fındık, F. and Habiby, F., “Metallographic Observation in Deformation of Al and Al-0.7 Mg-0.5Si Alloy”, “Turkish J. of Engineering & Environmental Sci.”, V.20, pp. 7-16, 1996.
  2. Fındık, F., Bindal, C. “Metal Matrix Composites”, Journal of Sciences and Technology, University of Marmara, 1996.
  3. Fındık, F., “The Inspection of Mechanical & Microstructural Properties of Polymer Matrix Composites”, in ”Advanced Multilayered and Fibre-Reinforced Composites” , (ed.) Y. M. Haddad, Kluwer Academic Publishers, 1998, the Netherlands.
  4. Fındık, F., “Discontinuous (Cellular) Precipitation”, J.Mater. Sci. Let., V.17, pp.79-83, 1998.
  5. Findik, F., Mrad, N., Johnston, A., “Strain Monitoring in Composite Patched Structures”, Composite Structures, V.49, No:3, pp. 331-338, 2000.
  6. Fındık, F., Unal, H. “Development of thermal residual strains in a single sided composite patch”, Composites Part B: Engineering, Volume 32, Issue 4, 2001, Pages 379-383.
  7. Tarim, N., Findik, F., Uzun, H., “Ballistic Impact Performance of Composite Structures”, Composite Structures, V.56/1 APR 2002, pp. 13-20.
  8. Dogan, H., Findik, F., Morgul, O., “Tribological Properties of Coated ASME 316L SS and Comparison with a Substrate”, Industrial Lubrication and Tribology, V.54 No. 1; 2002, pp. 5-10.
  9. Dogan H, Findik F, Morgul O; “Friction and wear behaviour of implanted AISI 316L SS and comparison with a substrate”, Materials & Design 23 (7): pp. 605-610, 2002.
  10. Findik, F., “Modulated Structures in Cu-32Ni-3Cr and Cu-46Ni-17Cr Alloys”, Canadian Metallurgical Quarterly, V.41 No. 3; 2002, pp. 337-347.
  11. Findik F, Misirlioglu M, Soy U, The structural features of glass fibre reinforced polyester matrix composites”, Sci Eng Compos Mater 10 (4): 287-295 2002.
  12. Dogan, H., Findik, F., Oztarhan, A., “Comparative study of wear mechanism of surface treated AISI 316L stainless steel”, Industrial Lubrication and Tribology, 55 (2-3): 76-83 2003.
  13. Unal, H., Findik, F., Mimaroglu, A., “Mechanical behaviour of nylon composites containing talc and kaolin”, Journal of Applied Polymer Science, 88 (7): 1694-1697 MAY 16 2003.
  14. Findik, F. ,Tarim, N., “Ballistic impact efficiency of polymer composites”, Composite Structures, 61 (3): 187-192 2003.
  15. Acarer, M., Gulenc, B., Findik, F., “Investigation of explosive welding parameters and their effects on microhardness and shear strenth”, Materials and Design, 24 (8): 659-664 DEC 2003.
  16. İlhan, E., Findik, F., Aslanlar, S., “An investigation of the factors affecting the design of drum dryers”, Materials and Design, 24 (7): 503-507 OCT 2003.
  17. Findik, F., Uzun, H., “Microstructure, hardness and electrical properties of silver based refractory contact materials”, Materials and Design, 24 (7): 489-492 OCT 2003.
  18. Ozcelik, B., Erzincanli, F., Findik, F., “Evaluation of handling results of various materials using a non-contact end-effector”, Industrial Robot: An International Journal, 30 (4): 363-369 JUL 2003.
  19. Caliskan, M, Soy, U, Findik, F., “An Analytic Investigation To Compare The Bonded And Bolted Repairing Methods Using Composite Single Lap Joint”, Sci Eng Compos Mater 11 (1): 69-77 2003.
  20. Findik, F., Yilmaz, R., Koksal, T., “Investigation of mechanical and physical properties of several industrial rubbers”, Materials and Design, 25 (4): 269-276 JUN 2004.
  21. Dogan, H., Findik, F., Oztarhan, A., “Tribological Studies of ZrO2-implanted on Stainless Steel Substrate”, Industrial Lubrication and Tribology, 56 (6): 341-345 2004.
  22. Kaya, A., Tekelioglu, M., Findik, F., “Effects of Various Parameters on Dynamic Characteristics in Adhesively Bonded Joints”, Materials Letters, 58 (2004) 3451-3456.
  23. Demir, A., Altinkok, N., Findik, F., “The Wear Behaviour of Dual Ceramic Particles (Al2O3/SiC) Reinforced Al Matrix Composites”, Key Engineering Materials, 264-268: 1079-1082 Part 1-3 2004.
  24. Acarer, M., Gulenc, B., Findik, F.,”The Influence of Some Factors on Steel/Steel Bonding Quality on Their Characteristics of Explosive Welding Joints ”, J.Mater.Sci.,39 (21): 6457-6466, 2004.
  25. Mutlu, I.,. Eldogan, O., Findik, F., “Production of ceramic additive automotive brake lining and investigation of its braking characterisation”, Industrial Lubrication and Tribology, 57 (2): 84-92 2005.

Profile Details

NULL

Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top