Open Journal of Organic Polymer Materials
Vol.9 No.1(2019), Paper ID 90539, 27
pages
DOI:10.4236/ojopm.2019.91001
The Effects of Build Parameters and Strain Rate on the Mechanical Properties of FDM 3D-Printed Acrylonitrile Butadiene Styrene
Kemar Hibbert, Grant Warner, Celeste Brown, Olusegun Ajide, Gbadebo Owolabi, Amin Azimi
Department of Mechanical Engineering, Howard University, Washington DC, USA
Department of Mechanical Engineering, Howard University, Washington DC, USA
Department of Mechanical Engineering, Howard University, Washington DC, USA
Department of Mechanical Engineering, University of Ibadan, Ibadan, Nigeria
Department of Mechanical Engineering, Howard University, Washington DC, USA
Department of Mechanical Engineering, Howard University, Washington DC, USA
Copyright © 2019 Kemar Hibbert, Grant Warner, Celeste Brown, Olusegun Ajide, Gbadebo Owolabi, Amin Azimi et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Hibbert, K. , Warner, G. , Brown, C. , Ajide, O. , Owolabi, G. and Azimi, A. (2019) The Effects of Build Parameters and Strain Rate on the Mechanical Properties of FDM 3D-Printed Acrylonitrile Butadiene Styrene.
Open Journal of Organic Polymer Materials,
9, 1-27. doi:
10.4236/ojopm.2019.91001.