Open Journal of Applied Sciences
Vol.7 No.7(2017), Paper ID 77638, 11
pages
DOI:10.4236/ojapps.2017.77027
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools
Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren
Department of Mechanical Engineering, School of Engineering & Technology, Jain University, Karnataka, India
Department of Mechanical Engineering, School of Engineering & Technology, Jain University, Karnataka, India
Department of Mechanical Engineering, School of Engineering & Technology, Jain University, Karnataka, India
Department of Mechanical Engineering, School of Engineering & Technology, Jain University, Karnataka, India
Department of Mechanical Engineering, School of Engineering & Technology, Jain University, Karnataka, India
Department of Mechanical Engineering, School of Engineering & Technology, Jain University, Karnataka, India
Copyright © 2017 Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Prasad, K. , Kashyap, K. , Richard, M. , Rao, P. , Rajole, A. and Hiren, R. (2017) Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools.
Open Journal of Applied Sciences,
7, 337-347. doi:
10.4236/ojapps.2017.77027.