Mechanical Engineering and Industrial Design Department, Faculty of Engineering, University of Cadiz, Puerto Real, Cádiz, Spain
Mechanical Engineering and Industrial Design Department, Faculty of Engineering, University of Cadiz, Puerto Real, Cádiz, Spain
Mechanical Engineering and Industrial Design Department, Faculty of Engineering, University of Cadiz, Puerto Real, Cádiz, Spain
Mechanical Engineering and Industrial Design Department, Faculty of Engineering, University of Cadiz, Puerto Real, Cádiz, Spain
Mechanical Engineering and Industrial Design Department, Faculty of Engineering, University of Cadiz, Puerto Real, Cádiz, Spain
Copyright © 2016 A. P. Valerga, M. Batista, J. Salguero, A. Gomez-Parra, M. Marcos et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Valerga, A. , Batista, M. , Salguero, J. , Gomez-Parra, A. and Marcos, M. (2016) Reverse Engineering Based Methodology for Redesigning Contour Milling Tools.
World Journal of Engineering and Technology,
4, 206-212. doi:
10.4236/wjet.2016.43D025.