Open Access Library Journal
Vol.2 No.3(2015), Paper ID 68156, 8
pages
DOI:10.4236/oalib.1101409
Preparation and Characterization of Copper Oxide Nanoparticles Synthesized via Chemical Precipitation Method
Ismat Zerin Luna, Lutfun Naher Hilary, A. M. Sarwaruddin Chowdhury, M. A. Gafur, Nuruzzaman Khan, Ruhul A. Khan
Department of Applied Chemistry and Chemical Engineering, Faculty of Engineering and Technology,
University of Dhaka, Dhaka, Bangladesh
Department of Applied Chemistry and Chemical Engineering, Faculty of Engineering and Technology,
University of Dhaka, Dhaka, Bangladesh
Department of Applied Chemistry and Chemical Engineering, Faculty of Engineering and Technology,
University of Dhaka, Dhaka, Bangladesh
Pilot Plant and Process Development Center (PP & PDC), Bangladesh Council of Scientific and Industrial
Research, Dhaka, Bangladesh
Department of Applied Chemistry and Chemical Engineering, Faculty of Engineering and Technology,
University of Dhaka, Dhaka, Bangladesh
Institute of Radiation and Polymer Technology, Bangladesh Atomic Energy Commission, Dhaka, Bangladesh
Copyright © 2015 Ismat Zerin Luna, Lutfun Naher Hilary, A. M. Sarwaruddin Chowdhury, M. A. Gafur, Nuruzzaman Khan, Ruhul A. Khan et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Luna, I. , Hilary, L. , Chowdhury, A. , Gafur, M. , Khan, N. and Khan, R. (2015) Preparation and Characterization of Copper Oxide Nanoparticles Synthesized via Chemical Precipitation Method.
Open Access Library Journal,
2, 1-8. doi:
10.4236/oalib.1101409.