Journal of Applied Mathematics and Physics
Vol.3 No.2(2015), Paper ID 53682, 10
pages
DOI:10.4236/jamp.2015.32031
Evaluation of the Surface of Nitinol after MR Polishing Process
Byung-Chan Kim, Jung-Won Lee, Seok-Jae Ha, Yong-Kyu Cho, Dong-Sung Kang, Myeong-Woo Cho
Department of Mechanical Engineering, Inha University, Incheon, Republic of Korea
Department of Mechanical Engineering, Inha University, Incheon, Republic of Korea
Department of Mechanical Engineering, Inha University, Incheon, Republic of Korea
Department of Mechanical Engineering, Inha University, Incheon, Republic of Korea
WISYS, Gunpo-si, Republic of Korea
Department of Mechanical Engineering, Inha University, Incheon, Republic of Korea
Copyright © 2015 Byung-Chan Kim, Jung-Won Lee, Seok-Jae Ha, Yong-Kyu Cho, Dong-Sung Kang, Myeong-Woo Cho et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Kim, B. , Lee, J. , Ha, S. , Cho, Y. , Kang, D. and Cho, M. (2015) Evaluation of the Surface of Nitinol after MR Polishing Process.
Journal of Applied Mathematics and Physics,
3, 208-217. doi:
10.4236/jamp.2015.32031.