Open Journal of Civil Engineering
Vol.4 No.3(2014), Paper ID 50177, 16
pages
DOI:10.4236/ojce.2014.43024
Bending Stiffness of Truss-Reinforced Steel-Concrete Composite Beams
Francesco Trentadue, Erika Mastromarino, Giuseppe Quaranta, Floriana Petrone, Giorgio Monti, Giuseppe Carlo Marano
Department of Civil Engineering and Architecture, Technical University of Bari, Bari, Italy
Metal.Ri s.r.l - via Giuseppe Abbruzzese, 42 - 70020 Bitetto (BA)
Department of Structural and Geotechnical Engineering, Sapienza University of Rome, Rome, Italy
Department of Civil and Environmental Engineering, University of California, Davis, CA, USA
Department of Structural and Geotechnical Engineering, Sapienza University of Rome, Rome, Italy
Department of Civil Engineering and Architecture, Technical University of Bari, Bari, Italy
Copyright © 2014 Francesco Trentadue, Erika Mastromarino, Giuseppe Quaranta, Floriana Petrone, Giorgio Monti, Giuseppe Carlo Marano et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Trentadue, F. , Mastromarino, E. , Quaranta, G. , Petrone, F. , Monti, G. and Marano, G. (2014) Bending Stiffness of Truss-Reinforced Steel-Concrete Composite Beams.
Open Journal of Civil Engineering,
4, 285-300. doi:
10.4236/ojce.2014.43024.