Modern Mechanical Engineering
Vol.4 No.1(2014), Paper ID 41471, 7
pages
DOI:10.4236/mme.2014.41001
Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool
Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi
Korea Institute on Industrial Technology, Future Manufacturing System R&D Group, Manufacturing System R&D Department, Cheonan-si, South Korea
Korea Institute on Industrial Technology, IT Converged Process R&D Group, Convergent Technology R&D Department, Ansan-si, South Korea
Korea Institute on Industrial Technology, Chungcheong Regional Division, Cheonan-si, South Korea
Korea Institute on Industrial Technology, Chungcheong Regional Division, Cheonan-si, South Korea
Korea Institute on Industrial Technology, IT Converged Process R&D Group, Convergent Technology R&D Department, Ansan-si, South Korea
Korea Institute on Industrial Technology, IT Converged Process R&D Group, Convergent Technology R&D Department, Ansan-si, South Korea
Copyright © 2014 Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Park, K. , Hong, Y. , Kim, K. , Lee, S. , Choi, H. and Choi, Y. (2014) Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool.
Modern Mechanical Engineering,
4, 1-7. doi:
10.4236/mme.2014.41001.