1Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engi-neering, Graduate School of Changwon National University, Changwon, Korea; 3Technology Research Institute, AMECO Co., Ltd., Korea.
Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engi-neering, Graduate School of Changwon National University, Changwon, Korea; 3Technology Research Institute, AMECO Co., Ltd., Korea.
Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engi-neering, Graduate School of Changwon National University, Changwon, Korea; 3Technology Research Institute, AMECO Co., Ltd., Korea.
Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engi-neering, Graduate School of Changwon National University, Changwon, Korea; 3Technology Research Institute, AMECO Co., Ltd., Korea.
Copyright © 2013 Y. H. Choi, S. T. Kim, T. Y. Seo, K. H. Kim et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Choi, Y. , Kim, S. , Seo, T. and Kim, K. (2013) Analysis of Dynamic Cross Response between Spindles in a Dual Spindle Type Multi-Functional Turning Machine.
Journal of Power and Energy Engineering,
1, 20-24. doi:
10.4236/jpee.2013.17004.