Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engineering, Graduate School of Changwon National University, Changwon, Korea; 3Research Institute, HNK Machine Tool Co., Ltd., Haman, Korea.
Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engineering, Graduate School of Changwon National University, Changwon, Korea; 3Research Institute, HNK Machine Tool Co., Ltd., Haman, Korea.
Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engineering, Graduate School of Changwon National University, Changwon, Korea; 3Research Institute, HNK Machine Tool Co., Ltd., Haman, Korea.
Department of Mechanical Engineering, Changwon National University, Changwon, Korea; 2Department of Mechanical Design Engineering, Graduate School of Changwon National University, Changwon, Korea; 3Research Institute, HNK Machine Tool Co., Ltd., Haman, Korea.
Copyright © 2013 Y. H. Choi, G. B. Ha, D. H. Kim, H. S. An et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Choi, Y. , Ha, G. , Kim, D. and An, H. (2013) Test and Evaluation of Stiffness of a Pin Turning Device for Large Marine Engine Crankshafts.
Journal of Power and Energy Engineering,
1, 14-19. doi:
10.4236/jpee.2013.17003.