Optics and Photonics Journal

Vol.3 No.4A(2013), Paper ID 35658, 5 pages

DOI:10.4236/opj.2013.34A007

 

The Effect of Laser Sintering Process Parameters on Cu Nanoparticle Ink in Room Conditions

 

Eerik Halonen, Esa Heinonen, Matti Mäntysalo

 

Department of Electronics and Communications Engineering, Tampere University of Technology, Tampere, Finland
Center of Microscopy and Nanotechnology CNMT, University of Oulu, Oulu, Finland
Department of Electronics and Communications Engineering, Tampere University of Technology, Tampere, Finland

 

Copyright © 2013 Eerik Halonen, Esa Heinonen, Matti Mäntysalo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

 

How to Cite this Article


E. Halonen, E. Heinonen and M. Mäntysalo, "The Effect of Laser Sintering Process Parameters on Cu Nanoparticle Ink in Room Conditions," Optics and Photonics Journal, Vol. 3 No. 4A, 2013, pp. 40-44. doi: 10.4236/opj.2013.34A007.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.