Journal of Minerals and Materials Characterization and Engineering
Vol.1 No.3(2013), Paper ID 31721, 9
pages
DOI:10.4236/jmmce.2013.13019
Assessment of Cutting Parameters Influencing on Thrust Force and Torque during Drilling Particulate Filled Glass Fabric Reinforced Epoxy Composites
Bhadrabasol Revappa Raju, Bheemappa Suresha, Ragera Parameshwarappa Swamy, Bannangadi Swamy Gowda Kanthraju
Department of Mechanical Engineering, PES Institute of Technology and Management, Shivamogga, India
Department of Mechanical Engineering, The National Institute of Engineering, Mysore, India
Department of Mechanical Engineering, University B.D.T. College of Engineering, Davangere, India
Department of Mechanical Engineering, Don Bosco Institute of Technology, Bangalore, India
Copyright © 2013 Bhadrabasol Revappa Raju, Bheemappa Suresha, Ragera Parameshwarappa Swamy, Bannangadi Swamy Gowda Kanthraju et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Raju, B. , Suresha, B. , Swamy, R. and Kanthraju, B. (2013) Assessment of Cutting Parameters Influencing on Thrust Force and Torque during Drilling Particulate Filled Glass Fabric Reinforced Epoxy Composites.
Journal of Minerals and Materials Characterization and Engineering,
1, 101-109. doi:
10.4236/jmmce.2013.13019.