Journal of Minerals and Materials Characterization and Engineering
Vol.11 No.4(2012), Paper ID 21043, 18
pages
DOI:10.4236/jmmce.2012.114025
Effect of Copper and Silicon Carbide Content on the Corrosion Resistance of Al-Mg Alloys in Acidic and Alkaline Solutions
Ahmad T. Mayyas, Mohammad M. Hamasha, Abdalla Alrashdan, Adel M. Hassan, Mohammed T. Hayajneh
Department of Automotive Engineering, Clemson University-International Center for Automotive Research (CU-ICAR), 4 Research Drive, Greenville, South Carolina 29607 USA.
Center for Autonomous Solar Power, State University of New York at Binghamton, Binghamton, NY 13850, USA
Center for Autonomous Solar Power, State University of New York at Binghamton, Binghamton, NY 13850, USA
Center for Autonomous Solar Power, State University of New York at Binghamton, Binghamton, NY 13850, USA
Center for Autonomous Solar Power, State University of New York at Binghamton, Binghamton, NY 13850, USA
Copyright © 2012 Ahmad T. Mayyas, Mohammad M. Hamasha, Abdalla Alrashdan, Adel M. Hassan, Mohammed T. Hayajneh et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
A. Mayyas, M. Hamasha, A. Alrashdan, A. Hassan and M. Hayajneh, "Effect of Copper and Silicon Carbide Content on the Corrosion Resistance of Al-Mg Alloys in Acidic and Alkaline Solutions,"
Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 4, 2012, pp. 335-352. doi:
10.4236/jmmce.2012.114025.