Applied Mathematics
Vol.5 No.13(2014), Article ID:47882,12 pages DOI:10.4236/am.2014.513194

Solution of Multi-Delay Dynamic Systems by Using Hybrid Functions

K. Maleknejad, R. Ezzati, T. Damercheli*

Department of Mathematics, College of Basic Sciences, Karaj Branch, Islamic Azad University, Alborz, Iran

Email: maleknejad@iust.ac.ir, ezati@kiau.ac.ir, *t.damercheli@kiau.ac.ir

Copyright © 2014 by authors and Scientific Research Publishing Inc.

This work is licensed under the Creative Commons Attribution International License (CC BY).

http://creativecommons.org/licenses/by/4.0/

Received 3 April 2014; revised 20 May 2014; accepted 4 June 2014

ABSTRACT

In this paper, we present a method for finding the solution of the linear multi-delay systems (MDS) by using the hybrid of the Block-Pulse functions and the Bernoulli polynomials. In this approach, the MDS is reduced to a system of linear algebraic equations by expanding various time functions for the hybrid functions and using operational matrices. To demonstrate the validity and the applicability of the technique, some examples are presented.

Keywords:Block-Pulse Functions, Bernoulli Polynomials, Multi-Delay Systems

1. Introduction

Delays occur frequently in biological, chemical, transportation, electronic, communication, manufacturing and power systems [1] . Time-delay and multi-delay systems are therefore very important classes of systems whose control and optimization have been of interest to many investigators [2] -[5] . While modeling such phenomena naturally requires the use of various systems, in many problems, such systems can not be solved explicitly. Therefore, it is important to find their approximate solutions by using some numerical methods. In recent years, the hybrid functions consisting of the combination of the Block-Pulse functions with the Chebyshev polynomials [6] , the Legendre polynomials [7] [8] , or the Taylor series [9] [10] have been shown to be a mathematical power tool for discretization of selected problems. Among these three hybrid functions, hybrids of the BlockPulse functions with the Legendre polynomials have been shown to be computationally more effective.

Recently a new hybrid function consisting of the combination of the Block-Pulse functions with the Bernoulli polynomials is presented [11] [12] . The advantages of the Bernoulli polynomials, over shifted the Legendre polynomials are:

• The operational matrix, in the Bernoulli polynomials, has less errors than for shifted the Legendre polynomials for. This is because for in we ignore the term while for in we ignore the term.

• The Bernoulli polynomials have less terms than shifted the Legendre polynomials. For example, has 5 terms while, has 7 terms, and this difference will increase by increasing m. Hence for approximating an arbitrary function we use less CPU time by applying the Bernoulli polynomials as compared to the shifted Legendre polynomials.

• The coefficient of individual terms in the Bernoulli polynomials, is smaller than the coefficient of individual terms in the shifted Legendre polynomials. Since the computational errors in the product are related to the coefficients of individual terms, the computational errors are less by using the Bernoulli polynomials.

In the present paper, we use the hybrid functions consisting of the combination of the Block-Pulse functions and the Bernoulli polynomials to solve the MDS. The method is based on converting the MDS into a system of multi-delay integral equations through integration. To eliminate integral operations, the unknown functions and various functions involved in the equations are approximated by the hybrid function and the operational matrices are used. To this end, operational matrices of multi-delay systems for the hybrid function are given. It will be seen that the operational matrices have many zero elements and are more sparse than the Legendre polynomials. These matrices are used to reduce the solution of MDS to the solution of a system of linear algebraic equations.

The paper is organized as follows: In Section 2, we describe the basic properties of the hybrid functions of the Block-Pulse and the Bernoulli polynomials required for our subsequent development. Section 3 is devoted to the formulation of linear time-varying multi-delay systems and the proposed numerical method is applied to the MDS. And in Section 4, we report our numerical findings and demonstrate the accuracy of the proposed scheme by considering some numerical examples. Finally, Section 5 gives some brief conclusions.

2. Hybrid of the Block-Pulse Functions and the Bernoulli Polynomials

Hybrid functions, are defined on the interval as [11]

(1)

where and are the order of the Block-Pulse functions and the Bernoulli polynomials, respectively. The Bernoulli polynomials of order are defined in [13] by

where, are the Bernoulli numbers. These numbers are a sequence of signed rational numbers that arise in the series expansion of trigonometric functions [14] and can be defined by the identity

Let be an arbitrary element in, there exist unique coefficients such that [11]

where

and

By using Equation (2) we obtain

where , and denotes the inner product. So we get

with

where is a matrix of order and is given by

(2)

Integration of the vector defined in Equation (4) can be approximated by

(3)

where is the operational matrix for integration and is given by [11]

(4)

where and are the identity and zero matrices, respectively, and

(5)

The following property of the product of two hybrid function vectors will also be used. Let

(6)

where is a product operational matrix. To illustrate the calculation procedure see [11] .

Multi-Delay Operational Matrix

The delay functions, are the shift of the function defined in Equation (4), along the time axis by, where are rational numbers in. It is assumed without loss of generality that. If we expand in terms of, we find

where is the delay operational matrix of hybrid functions corresponding to and is given by

(7)

where elements of the delay matrix are the matrix given by

(8)

It is noted that the first 1 in the first row is located at the th column where

We define as the smallest positive integer number for which for and is the greatest common divisor of the integers,.

3. Problem Statement and Approximation Using Hybrid Functions

Consider the following linear time multi-delay dynamic systems:

(9)

(10)

(11)

where, , and, , are matrices of appropriate dimensions, is a constant specified vector, and is an arbitrary known function. The problem is to find, satisfying Equations (13) and (14). Let

(12)

(13)

where and are the and dimensional identity matrices, is vector and denotes the Kronecker product [15] . Using the property of the Kronecker product, and are matrices of order and, respectively. Assume that each and each of, , , can be written in terms of hybrid functions as

Then, using Equations (15) and (16), we have

(14)

where and are vectors of order and, respectively, given by

Similarly, we have

(15)

where and, , are vectors of order given by

Let approximate and, , by Equations (2)-(4) as follows

(16)

where, are of dimensions, and is of dimension.

We can also write, , in terms of the hybrid functions as

where

and is the delay operational matrix. Moreover

(17)

(18)

where

and

where, , are constant matrices of order. Note is product operational matrix that to illustrate the calculation procedure we choose and. Thus we have

(19)

where and, are the matrices given by

By integrating Equation (12) from to and using Equations (15)-(22), we have

(20)

simplifying Equation (23) we obtain

(21)

by solving the set of linear algebraic equations Equation (24), we obtain the coefficients vector.

4. Numerical Implementation

In this section, to give a clear overview of the analysis method presented and to demonstrate the applicability and accuracy of the method three examples are given.

Example 1. Consider the multi-delay dynamic system from [7] described by

(22)

with

(23)

and

(24)

The exact solutions are

To solve this problem by the hybrid functions, we select and. Let

(25)

where, and can be obtained similarly to Equations (3) and (4). By expanding and in terms of the hybrid functions we get

(26)

(27)

Therefore, we have

(28)

(29)

where and the 24 × 24 matrices, can be calculated as Equation (19). Also D1 and D2 are the 24 ×24 delay operational matrices given by

where

Integrating Equation (25) from to and using Equations (26)-(27) and substituting Equations (28)-(32) we get

(30)

where is the operational matrix of integration given in Equation (7). By solving Equation (33) the values of and can be found as

To define and for in the interval we map into by mapping into, and for in the interval we map this interval into by mapping into, and similarly for the other intervals. From Equation (28) we get

After simplifying the same value as the exact and would be obtained.

Example 2. Consider the delay dynamic system described by

(31)

with

(32)

and

(33)

The exact solutions are

To solve this problem by using of the hybrid functions, we select and. Let

(34)

where, and can be obtained similarly to Equations (3)-(4). Using Equation (37) we get

where is the delay operational matrix given by

where

(35)

By expanding in terms of hybrid functions we obtain

(36)

Integrating Equation (34) from to and using Equations (35)-(36) and substituting Equations (37)-(39), we get

(37)

where is the operational matrix of integration given in Equation (7). By solving Equation (40) the values of and can be found. By using from Equation (37) and simplifying the same value as the exact and would be obtained.

Example 3. Consider the following multi-delay system with delay in both control and state described by

(38)

with

(39)

and

(40)

The exact solutions are

To solve this problem by using the hybrid functions, we select and. Let

(41)

where, and can be obtained similarly to Equations (3) and (4). By expanding and in terms of hybrid functions we get

(42)

Using Equation (44) and (45) we obtain

(43)

where and are the delay operational matrices given by

(44)

where

By integrating Equation (41) from 0 to t and using Equations (42) and (43) and substituting Equations (44) and (47), we get

(45)

where is the operational matrix of integration given in Equation (7). By solving Equation (48) the values of and can be found. By using from Equation (44) and simplifying the same value as the exact and would be obtained. In Table 1 a comparison is made between the exact solution and the approximation solution of and for. The approximation value of and on, is the same as the exact solution.

Table 1. Approximate solutions and exact solutions of Example 3.

5. Conclusion

The hybrid of the Block-Pulse functions and the Bernoulli polynomials and the associated operational matrices of integration and delay are applied to solve the linear multi-delay dynamic systems. The method is computationally very attractive, at the same time keeping the accuracy of the solution. It is also shown that the hybrid functions provide exact solutions in each subintervals for Examples 1, 2 and 3. The presented method reduces multi-delay systems to the solution a system of algebraic equations, and so the calculation is easy. The matrices, and in Equations (5), (7) and (10) are sparse, hence the present method is very attractive and reduces the CPU time and computer memory.

References

  1. Malek-Zavarei, M. and Jamshidi, M. (1987) Time Delay Systems: Analysis, Optimization and Applications (North-Holland Systems and Control Series). Elsevier Science, New York.
  2. Harrison, R.F. (1993) Optimal Control of Vehicle Suspension Dynamics Incorporating Front-to-Rear Excitation Delays: An Approximate Solution. Journal of Sound and Vibration, 168, 339-354. http://dx.doi.org/10.1006/jsvi.1993.1377
  3. Lee, Y.S. and Maurer, P. (1995) A Compiled Event-Driven Multi Delay Simulator. Technical Report Number DA-30, Department of Computer Science and Engineering, University of South Florida, Tampa.
  4. Cai, G. and Huang, J. (2002) Optimal Control Method with Time Delay in Control. Journal of Sound and Vibration, 251, 383-394. http://dx.doi.org/10.1006/jsvi.2001.3999
  5. Ji, J.C. and Leung, A.Y.T. (2002) Resonances of a Non-Linear s.d.o.f. System with Two Time-Delays in Linear Feedback Control. Journal of Sound and Vibration, 253, 985-1000. http://dx.doi.org/10.1006/jsvi.2001.3974
  6. Razzaghi, M. and Marzban, H.R. (2000) Direct Method for Variational Problems via Hybrid of Block-Pulse and Chebyshev Functions. Mathematical Problems in Engineering, 6, 85-97. http://dx.doi.org/10.1155/S1024123X00001265
  7. Marzban, H.R. and Razzaghi, M. (2004) Optimal Control of Linear Delay Systems via Hybrid of Block-Pulse and Legendre Polynomials. Journal of the Franklin Institute, 341, 279-293. http://dx.doi.org/10.1016/j.jfranklin.2003.12.011
  8. Maleknejad, K., Basirat, B. and Hashemizadeh, E. (2011) Hybrid Legendre Polynomials and Block-Pulse Functions Approach for Nonlinear Volterra-Fredholm Integro-Differential Equations. Computers and Mathematics with Applications, 61, 2821-2828. http://dx.doi.org/10.1016/j.camwa.2011.03.055
  9. Marzban, H.R. and Razzaghi, M. (2006) Solution of Multi-Delay Systems Using Hybrid of Block-Pulse Functions and Taylor Series. Journal of Sound and Vibration, 292, 954-963. http://dx.doi.org/10.1016/j.jsv.2005.08.007
  10. Maleknejad, K. and Mahmoudi, Y. (2004) Numerical Solution of Linear Fredholm Integral Equation by Using Hybrid Taylor and Block-Pulse Functions. Applied Mathematics and Computation, 149, 799-806. http://dx.doi.org/10.1016/S0096-3003(03)00180-2
  11. Haddadi, N., Ordokhani, Y. and Razzaghi, M. (2011) Optimal Control of Delay Systems by Using a Hybrid Functions Approximation. Journal of Optimization Theory and Applications, 153, 338-356. http://dx.doi.org/10.1007/s10957-011-9932-1
  12. Mashayekhi, S., Ordokhani, Y. and Razzaghi, M. (2012) Hybrid Functions Approach for Nonlinear Constrained Optimal Control Problems. Communications in Nonlinear Science and Numerical Simulation, 17, 1831-1843. http://dx.doi.org/10.1016/j.cnsns.2011.09.008
  13. Costabile, F., Dellaccio, F. and Gualtieri, M.I. (2006) A New Approach to Bernoulli Polynomials. Rendiconti di Matematica, Serie VII, 26, 1-12.
  14. Arfken, G. (1985) Mathematical Methods for Physicists. 3rd Edition, Academic Press, San Diego.
  15. Lancaster, P. (1969) Theory of Matrices. Academic Press, New York.

NOTES

*Corresponding author.