[1]
|
Wust, P., et al. (2002) Hyperthermia in combined treatment of cancer. The LANCET Oncology, 3, 487-497.
doi:10.1016/S1470-2045(02)00818-5
|
[2]
|
Lee, E.R., Kapp, D.S., Lohrbach, A.W. and Sokol, J.L. (1994) Influence of water bolus temperature on measured skin surface and intra thermal temperatures. International Journal of Hyperthermia, 10, 59-72.
doi:10.3109/02656739409009332
|
[3]
|
De Bruijne, M., Samras, T., Bakker, J.F. and Rhoon, G.C. (2006) Effects of water bolus size, shape and configuration on the SAR distribution pattern of the Lucite cone applicator. International Journal of Hyperthermia, 22, 1528. doi:10.1080/02656730500384297
|
[4]
|
Griffithsh, H., Ahmed, A. and Smith, C.W. (1984) Power loss in skin cooling pillows during RF hyperthermia. British Journal of Radiology, 57, 254-256.
doi:10.1259/0007-1285-57-675-254
|
[5]
|
Reddy, N.M.S., Balakrishnan, I.S., Bhaskar, B.K., Krishnamurthi, S. and Shanta, V. (1986) Optimization of power deposition and the rate of heating of tissue during RF capacitive hyperthermia. International Journal of Hyperthermia, 2, 321-323. doi:10.3109/02656738609016489
|
[6]
|
Reddy, N.M.S., Shanta, V. and Krishnamurthi, S. (1986) On minimization of toxicity to skin during capacitive radiofrequency hyperthermia. British Journal of Radiology, 9, 1129-1131. doi:10.1259/0007-1285-59-707-1129
|
[7]
|
Neuman, D.G., Stauffer, P.R., Jacobsen, S. and Rossetto, F. (2002) SAR pattern perturbations from resonance effects in water bolus layers used with superficial microwave hyperthermia applicators. International Journal of Hyperthermia, 18, 180-193.
doi:10.1080/02656730110119198
|
[8]
|
Sherar, M.D., et al. (1993) Beam shaping for microwave waveguide hyperthermia applicators. International Journal of Radiation Oncology Biology Physics, 25, 849-857.
doi:10.1016/0360-3016(93)90315-M
|
[9]
|
Kumaradas, J.C. and Sherar, M.D. (2003) Optimization of a beam shaping bolus for superficial microwave hyperthermia waveguide applicators using a finite element method. Physics in Medicine and Biology, 48, 1-18.
doi:10.1088/0031-9155/48/1/301
|
[10]
|
Ebrahimi-Ganjeh, M.A. and Attari, A.R. (2008) Study of water bolus effect on SAR penetration depth and effective field size for local hyperthermia. Progress in Electromagnetic Research B, 4, 273-283.
doi:10.2528/PIERB08011403
|
[11]
|
Huang, C.H. and Wang, S.P. (1999) A three dimensional inverse heat conduction problem in estimating surface heat flux by conjugate gradient method. International Journal of Heat and Mass Transfer, 42, 3387-3403.
doi:10.1016/S0017-9310(99)00020-4
|
[12]
|
Dhar, P.K. and Sinha, D.K. (1988) Temperature control of tissue by transient-induced microwave. International Journal of Systems Science, 19, 2051-2055.
doi:10.1080/00207728808964097
|
[13]
|
Loulou, T. and Scott, E.P. (2002) Thermal dose optimization in hyperthermia treatments by using the conjugate gradient method. Numerical Heat Transfer, Part A: Applications, 42, 661-683.
doi:10.1080/10407780290059756
|
[14]
|
Loulou, T. and Scott, E.P. (2006) An inverse heat conduction problem with heat flux measurements. International Journal for Numerical Methods in Engineering, 67, 1587-1616. doi:10.1002/nme.1674
|
[15]
|
Pennes, H.H. (1948) Analysis of tissue and arterial blood temperatures in the resting human forearm. Journal of Applied Physiology, 1, 93-122.
|
[16]
|
Holman, J. P. (2002) Heat transfer. 9th Edition, McGraw Hill, New York.
|
[17]
|
Ozisik, M.N. and Orlande, H.R.B. (2000) Inverse heat transfer fundamentals and applications. Taylor & Francis, New York.
|
[18]
|
Kato, H. and Ishida, T. (1987) Development of agar phantom adaptable for simulation of various tissues in the range 5 40 MHz (Hyperthermia treatment of cancer). Physics in Medicine and Biology, 72, 221-226.
doi:10.1088/0031-9155/32/2/006
|