Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Abrasive WaterJet Machining of Thick Carrara Marble: Cutting Performance vs. Profile, Lagging and WaterJet Angle Assessments"
written by Mohammad S. Alsoufi, Dhia K. Suker, Mohammed W. Alhazmi, Sufyan Azam,
published by Materials Sciences and Applications, Vol.8 No.5, 2017
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] APPLICATION OF RESPONSE SURFACE METHODOLOGY FOR THE OPTIMIZATION OF THE CONTROL FACTORS OF ABRASIVE FLOW MACHINING OF …
2020
[2] Application of response surface methodology for the optimization of the control factors of abrasive flow machining of multiple holes in zinc and Al/SiCp MMC …
2020
[3] Parameters optimization for ultrahigh-pressure pure water and abrasive water jet of Pterocarpus macarocarpus Kurz processing
2018
[4] Quantitative analysis of 0% infill density surface profile of printed part fabricated by personal FDM 3D printer
2018
[5] Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost …
2018
[6] Experimental Investigation of Wire-EDM Process Parameters for Surface Roughness in the Machining of Carbon Steel 1017 and Aluminum Alloy 6060
2018
[7] Surface Roughness Quality and Dimensional Accuracy-A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective …
2018
[8] Mechanical reverse engineering approach for precise measurements of reproducing disc CAM
2018
[9] Surface roughness quality and dimensional accuracy—a comprehensive analysis of 100% infill printed parts fabricated by a personal/desktop cost-effective …
2018
[10] PARAMETERS OPTIMIZATION FOR ULTRAHIGH-PRESSURE PURE WATER AND ABRASIVE WATER JET OF PTEROCARPUS MACAROCARPUS KURZ …
2018
[11] The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test
2017
[12] How Surface Roughness Performance of Printed Parts Manufactured by Desktop FDM 3D Printer with PLA+ is Influenced by Measuring Direction
2017
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top