Optimization of Tribological Performance of Al-6061T6-15% SiCp-15% Al<sub>2</sub>O<sub>3</sub> Hybrid Metal Matrix Composites Using Taguchi Method & Grey Relational Analysis

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Citations

Journals Menu

Guidelines & Policies

"Optimization of Tribological Performance of Al-6061T6-15% SiCp-15% Al₂O₃ Hybrid Metal Matrix Composites Using Taguchi Method & Grey Relational Analysis"
written by Ashok Kr. Mishra, Vinod Kumar, Rajesh Kr. Srivastava,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.4, 2014

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Nano SiC-reinforced AA7178 matrix alloy: corrosion behavior and characterization
	Silicon, 2024

[2]	Research on the Optimization of Tribological Performance of Wind Power Lubricating Grease Based on Carbon Emission
	Journal of Engineering …, 2024

[3]	Dry sliding wear response of aluminium matrix composites (AMCs): a critical review
	Materials Research Express, 2023

[4]	Al 6061hybrid metal matrix composites with SiC & Al2O3 using stir casting: A review
	Materials Today: Proceedings, 2023

[5]	Wear performance analysis and optimization of process parameters of novel AA7178/nTiO2 using ANN-GRA method
	… Engineers, Part E: Journal of Process …, 2023

[6]	Evaluation of mechanical and wear properties of AA6063/(Si3N4) 6%–12%/(CuN2O6) 2%–4% composite via PM route and optimization through robust design …
	2022

[7]	Investigation of Tribological-Based Thermal Behaviours of Lubricating Oil of Worm Gearbox: A Review
	Advances in Mechanical and …, 2022

[8]	A comprehension review of dry sliding wear on aluminum matrix composites
	Materials Today …, 2022

[9]	Tribological behavior of high-entropy alloy particle reinforced aluminum matrix composites and their key impacting factors
	Tribology International, 2022

[10]	Wear behavior of light-weight metal matrix nanocomposites
	Ceramics International, 2022

[11]	Fabrication and Mechanical Behaviour Investigation on Aluminium 7075 Boron Carbide and Inconel Alloy 625 Metal Matrix Composite Using Ultra Sonic Stir Casting …
	Annales de Chimie Science …, 2022

[12]	The compound Taguchi and grey relational analysis used to optimize the tribological parameters of worm gear under wet condition
	Materials Today: Proceedings, 2021

[13]	Optimization of process parameters by Hybrid Taguchi-Grey Relational Analysis for thermal behaviours of lubricant oil of worm gearbox
	Materials Today …, 2021

[14]	Mechanical and tribological analysis of Ni/TiC powder filled ZA-27 alloy composites
	Materials Today: Proceedings, 2021

[15]	Mechanical and tribological investigation on Al LM4/TiC composite fabricated through bottom pouring method
	2021

[16]	Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites
	2020

[17]	Multi-objective optimisation of dry sliding wear control parameters for stir casted AA7075- TiO2 composites using Taguchi-Grey relational approach
	2020

[18]	Multi-objective optimisation of process parameters in turning of Al6061 alloys using DEFORM-3D
	2020

[19]	Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview
	2019

[20]	Investigation of mechanical properties of Al6061/Al2O3-SiC composites fabricated by stir casting
	A JOURNAL OF COMPOSITION THEORY, 2019

[21]	FABRICATION AND CHARACTERIZATION OF AL6063-AL2O3-SIC COMPOSITES BY STIR CASTING
	CGC International Journal of Contemporary Technology and Research, 2018

[22]	Effect of reinforcement and wear parameters on dry sliding wear of aluminum composites-A review
	Materials Today: Proceedings, 2018

[23]	Mechanical Investigation of Aluminum Hybrid Composite Reinforced with CNT and Aluminum Oxide (Al2O3)
	Advanced Science, Engineering and Medicine, 2018

[24]	Mechanical Characterization of Stir Cast Al 6063 TiO2-Cu Reinforced Hybrid Metal Matrix Composites
	Materials Today: Proceedings, 2018

[25]	An Experimental Investigation of Metal Matrix Composites of Aluminium (Lm6), Boroncarbide and Flyash
	Australian Journal of Basic and Applied Sciences, 2016

[1]	Machine learning-based prediction of coefficient of friction and specific wear rate in aluminum-based metal matrix composites Tribology - Materials, Surfaces & Interfaces, 2026 DOI:10.1177/17515831251401637

[2]	Systematic Wear Rate Analysis of Ti–6Al–4 V Based Hybrid Composites Using Taguchi Optimizer and Machine Learning Classifiers Journal of The Institution of Engineers (India): Series D, 2025 DOI:10.1007/s40033-025-00871-4

[3]	Investigation and optimization of process parameters for WEDM on Al7475/SiC/Gr AMMCs using Taguchi grey relational analysis 5TH INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING ASPECTS FOR SUSTAINABLE ENERGY – 2023 (5ICMED2023), 2025 DOI:10.1063/5.0263723

[4]	Nano SiC-Reinforced AA7178 Matrix Alloy: Corrosion Behavior and Characterization Silicon, 2024 DOI:10.1007/s12633-023-02785-w

[5]	Research on Air Quality in the Pearl River Delta Region Based on Grey Relational Analysis E3S Web of Conferences, 2024 DOI:10.1051/e3sconf/202453601011

[6]	Optimization of tribological behavior of Aluminium (A356) composites using TGRA technique Matéria (Rio de Janeiro), 2024 DOI:10.1590/1517-7076-rmat-2024-0129

[7]	Dry sliding wear response of aluminium matrix composites (AMCs): a critical review Materials Research Express, 2023 DOI:10.1088/2053-1591/acb63c

[8]	Advances in Mechanical and Materials Technology Lecture Notes in Mechanical Engineering, 2022 DOI:10.1007/978-981-16-2794-1_100

[9]	Evaluation of mechanical and wear properties of AA6063/(Si3N4)6%–12% /(CuN2O6)2%–4% composite via PM route and optimization through robust design technique Materials Research Express, 2022 DOI:10.1088/2053-1591/ac7d41

[10]	The compound Taguchi and grey relational analysis used to optimize the tribological parameters of worm gear under wet condition Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.05.248

[11]	Mechanical and tribological analysis of Ni/TiC powder filled ZA-27 alloy composites Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.10.728

[12]	Multi-objective optimisation of dry sliding wear control parameters for stir casted AA7075- TiO2 composites using Taguchi-Grey relational approach Australian Journal of Mechanical Engineering, 2020 DOI:10.1080/14484846.2020.1815997

[13]	Effect of reinforcement and wear parameters on dry sliding wear of aluminum composites - A review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.12.188

[14]	Mechanical Characterization of Stir Cast Al 6063 TiO2-Cu Reinforced Hybrid Metal Matrix Composites Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.178

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies