Interlaminar Fracture Toughness of Epoxy Glass Fiber Fly Ash Laminate Composite

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Citations

"Interlaminar Fracture Toughness of Epoxy Glass Fiber Fly Ash Laminate Composite"
written by Ajit Bhandakkar, Niraj Kumar, R. C. Prasad, Shankar M. L. Sastry,
published by Materials Sciences and Applications, Vol.5 No.4, 2014

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Vinyl-ester nanocomposites based on a binary-solvent system for well-exfoliated graphene and enhanced performance
	Journal of Reinforced …, 2024

[2]	Structural Analysis of Carbon Fiber 3D-Printed Ribs for Small Wind Turbine Blades
	Elías, N Damian-Escoto, K Choo… - Polymers, 2022

[3]	Experimental and Numerical Validation of Unmanned Aerial Vehicle Structure Fabricated using Graphene based Polymer Matrix Composites.
	2020

[4]	On the mixed mode I/II/III inter-laminar fracture toughness of cotton/epoxy laminated composites
	2020

[5]	Experimental, theoretical and numerical investigation of the drilling effects on mode I delamination of laminated composites
	2020

[6]	Rheology in Processing of Polymeric Composites
	2020

[7]	AGGLOMERATES WITHIN BALL-MILLED LIGNOCELLULOSIC PARTICLES USING MINIMUM CRYSTAL SIZES
	2019

[8]	Green production of silica nanoparticles from maize stalk
	2019

[9]	Development and Characterization of E-Glass Particulate Reinforced Epoxy Composite for Automobile Application
	2019

[10]	Influence of Ca 2 SiO 4 as fillers on Mechanical Properties of Epoxy Polymer Matrix Composites
	International Journal of Engineering Research & Technology (IJERT), 2019

[11]	Development and Characterisation of Epoxy-Alumininum-Coconut Shell Particulate Hybrid Nanocomposite for Automobile Applications
	2017

[12]	A novel Top Surface Analysis method for Mode I interface characterisation using Digital Image Correlation
	Engineering Fracture Mechanics, 2017

[13]	Effects of Hydrothermal Ageing on the Microbond Interfacial Shear Strength of NaOH Treated Sisal Fibre Reinforced Polyester Composites
	2016

[14]	Effect of Environmental Conditions on Flexural Strength and Fracture Toughness of Particulate Filled Glass-Epoxy Hybrid Composites
	2016

[15]	Improved Mode I fracture resistance of CFRP composites by reinforcing epoxy matrix with recycled short milled carbon fibre
	Construction and Building Materials, 2016

[16]	The Impact of Crude Oil Contaminated Natural Sand on Polymer Concrete
	2016

[17]	Developing Short Milled Carbon Fibre Modified Toughened Epoxy Matrix for Superior and Inexpensive infrastructural CFRP Laminates
	2016

[18]	Effect of Adding Nano-Fillers on the Mechanical Properties of Glass Fiber Reinforced Polymer
	Minia Journal of Engineering and Technology, 2015

[19]	Influence of Ca2SiO4 as fillers on Mechanical Properties of Epoxy Polymer Matrix Composites

[1]	Effect of B4C Particulates Addition on the Hardness of Polymeric Resins and Mode‐I Interlaminar Fracture Toughness of Carbon/Epoxy Textile Composite Polymers for Advanced Technologies, 2025 DOI:10.1002/pat.70075

[2]	Vinyl-ester nanocomposites based on a binary-solvent system for well-exfoliated graphene and enhanced performance Journal of Reinforced Plastics and Composites, 2024 DOI:10.1177/07316844241229189

[3]	Effects of Hydrothermal Ageing on the Microbond Interfacial Shear Strength of NaOH Treated Sisal Fibre Reinforced Polyester Composites Journal of Natural and Applied Sciences, 2020 DOI:10.53974/unza.jonas.2.1.370

[4]	Processability of Polymeric Composites 2020 DOI:10.1007/978-81-322-3933-8_4

[5]	Green production of silica nanoparticles from maize stalk Particulate Science and Technology, 2019 DOI:10.1080/02726351.2019.1578845

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies