[1]
|
H. Hiromitsu, M. Kouichi, N. Eiichi, F. Tohru, “Vortex Shedding from Tube Banks with Closely Mounted Serrated Fin”, Journal of Environmentand Engineering, Vol. 6, No. 1, 2011, pp. 69-80. Udoi: 10.1299/jee.6.69
|
[2]
|
C. W. M. van der Geld and J. M. W. M. Schoonen, “Design Improvement of Shell and Tube Heat Exchanger based on Practical Experience and Numerical Analysis”, Design Report, Eindhoven University of Technology, Netherlands, 1991, pp. 74-87.
|
[3]
|
S. Wang, J. Wen, Y. Li, “An Experimental Investigation of Heat Transfer Enhancement for a Shell-and-Tube Heat Exchanger”, Applied Thermal Engineering Vol. 29 No. 11-12, 2009, pp. 2433–2438. Udoi:10.1016/j.applthermaleng.2008.12.008
|
[4]
|
V. K. Patel, R.V. Rao, “Design Optimization of Shell-and-Tube Heat Exchanger Using Particle Swarm Optimization Technique”, Applied Thermal Engineering, Vol. 30, No. 11-12, 20010 pp. 1417-1425. Udoi:10.1016/j.applthermaleng.2010.03.001
|
[5]
|
A. L. H. Costa, E. M. Queiroz, “Design Optimization of Shell and Tube Heat Exchangers”, Applied Thermal Engineering, Vol. 28, no. 14-15, 2008, pp. 1798–1805. Udoi:10.1016/j.applthermaleng.2007.11.009
|
[6]
|
R. Hosseini, A. Hosseini-Ghaffar, M. Soltani, “Experimental Determination of Shell Side Heat Transfer Coefficient and Pressure Drop for an Oil Cooler Shell-and-Tube Heat Exchanger with Three Different Tube Bundles”, Applied Thermal Engineering, Vol. 27, No. 5-6, 2007, pp.1001–1008. Udoi:10.1016/j.applthermaleng.2006.07.023
|
[7]
|
V. Hejazi, M.A. Akhavan-Behabadi, A. Afshari, “Experimental Investigation of Twisted Tape Inserts Performance on Condensation Heat Transfer Enhancement and Pressure Drop”, International Communications in Heat and Mass Transfer, Vol. 37, No. 9, 2010, pp. 1376–1387. Udoi:10.1016/j.icheatmasstransfer.2010.07.021
|
[8]
|
I. Conté, X.F. Peng, “Numerical and Experimental Investigations of Heat Transfer Performance of Rectangular Coil Heat Exchangers”, Applied Thermal Engineering, Vol. 29, No. 8-9, pp. 1799–1808, 2009. Udoi:10.1016/j.applthermaleng.2008.08.013
|
[9]
|
Y. Li, X. Jiang, X. Huang, J. Jia, J. Tong, “Optimization of High-Pressure Shell-and-Tube Heat Exchanger for Syngas Cooling in an IGCC”, International Journal of Heat and Mass Transfer, Vol. 53, No. 21-22, 2010, pp. 4543–4551. Udoi:10.1016/j.ijheatmasstransfer.2010.04.038
|
[10]
|
Standards of the Tubular Exchanger Manufacturer’s Association [TEMA], 8th edition, 1999, pp. 95-123.
|
[11]
|
R. Mukherjee, “Practical Thermal Design of Shell and Heat Exchangers”, 2004, pp. 189-208.
|