[1]
|
J. F. Yue , S. H. Liang, X. Y. Ning, et al., “Structural Features and Performance Analysis of Wall-arrangement Tangential Firing System for a 600 MW Ultra Supercritical Boiler,” Journal of Chinese Society of Power Engineering, Vol. 31, No. 8, 2011, pp. 598-604.
|
[2]
|
M. Zhu, Z. X. Zhang, T. Zhou, et al., “Calculation on Water Wall Temperature in the Furnace of a 1000 MW Ultra-supercritical Tower Boiler,” Journal of Chinese Society of Power Engineering, Vol. 32, No. 1, 1995, pp. 1-8.
|
[3]
|
M. Yu, G. Y. Yu, F. X. Zhang, et al., “Heat Transfer Characteristics of Vertical Upward Internally Ribbed Tube in Supercritical Sliding-pressure Operation Boilers,” Journal of Chinese Society of Power Engineering, Vol. 31, No. 5, 2011, pp. 321-324.
|
[4]
|
T. Zhou, Z. X. Zhang, C. Zhao, et al., “Simplified Calculation on One-dimensional Combustion and Heat Transfer in 1000 MW USC Tower Type Boilers,” Combustion Science Conference of Chinese society of Engineering Thermophysics, Guangzhou, 3-6 December 2010.
|
[5]
|
F. G. Liu, “Coupled Convection and Radiation Modeling of Furnace in Supercritical Pressure Boilers Based on Thermal Load Characteristics,” Journal of Combustion Science and Technology, Vol. 16, No. 4, 2010, pp. 369-374.
|
[6]
|
X. H. Han, Z. R. Zhao and M. C. Zhang, “Mathematical Modelling for Heat Transfer Process in Tangential-fired Boiler Furnace,” Journal of Combustion Science and Technology, Vol. 2, No. 3, 1999, pp. 369-374.
|
[7]
|
V. B. Ivanovic, “Reliable Simple Zonal Method of the Furnace Thermal Calculation,” Thermal Science, Vol. 9, No. 2, 2005, pp. 45-55. doi:10.2298/TSCI0502045I
|
[8]
|
Y. Yang, “Experimental Research on the Dynamic and Heat Transfer Characteristics of 1000 MW USC Pressure Once-through Boiler Spiral Water-wall,” Master Dissertation Thesis, Shanghai Power Equipment Research Institute, Shanghai, 2010.
|