[1]
|
Bhat, N. V. and Naik, S. G., 1984, Textile Res. J., vol. 54, pp. 868.
|
[2]
|
Jabarin, S. A. and Lofgren, E. A., 1994, J Appl Polym Sci, vol. 53, pp. 411.
|
[3]
|
Pages, P., Carrasco, F., Saurina, J. and Colom, X., 1996, J Appl Polym Sci, vol. 60,
pp. 153.
|
[4]
|
Hoekstra, H. D., Breen, J.and Die Angew, 1997, Makromol Chem, vol. 252, pp.69.
|
[5]
|
Hoekstra HD, Spoormaker JL, Breen J. and Die Angew, 1997, MakromolChem, vol.
247, pp. 91.
|
[6]
|
Gonzalez, A. V., Cervantes-UC, J. M. and Veleva, L., 1999, Polym Degrad Stab, vol.
63, pp. 253.
|
[7]
|
Satoto, R., Subowo, W., Yusiasih, R., Takane, Y., Watanabe, Y. and Hatakeyama, T.,
1997, Polym Degrad Stab, vol. 56, pp. 275.
|
[8]
|
Bruijn JCM. Degradation profiles of thick high density polyethylene samples after
outdoor and arti.cial weathering. In: Clough RL, Billingham NC, Gillen KT, editors.
Polymer durability: degradation, stabilisation and lifetime prediction, Advances in
Chemistry Series 249. Washington: American Chemical Society; 1996. pp. 599.
|
[9]
|
Clegg, D. W and A. A. Collyer; 1993, The Structure & Properties of Polymeric
Materials, The Institute of Materials.
|
[10]
|
John Moalli; Plastics Failure Analysis and Prevention, Menlo Park, California,USA.
|
[11]
|
Ketan Shah et. al, Sep 1998, Technical paper series, Gas Permeability and Medical
Film Products.
|
[12]
|
Salame, M.; 1989, Plastic Film Technology, vol. 1, Finlayson KM (ed), Lancaster,
PA, Technomic, pp. 132.
|
[13]
|
Briston, J. H.; 1984, Plastic Films, New York, Wiley.
|
[14]
|
Symposium on High Temperature and Environmental Effects on Polymeric
Composites, Oct 15, 1991, San Diego, CA, USA.
|
[15]
|
Aida, F. Shinan Wang; Fujita, M.; Tanimoto, G.; Fujiwara, Y., 1997, Journal of
electrostatics, vol. 42, n1-2, pp. 3-15, Tokyo, Japan, Elsevier, Netherlands.
|
[16]
|
Suwanprateeb, J.; 2004, Polymer testing, vol. 23, pp. 157 – 161.
|
[17]
|
Lynch, J. K.; Nosker, T. J.; Renfree, R. W.; Krishnaswamy, P. and Francini, R.;
"Weathering Effects on Mechanical Properties of Recycled HDPE Based Plastic
Lumber", 2001, Proceedings, Society of Plastics Engineers, ANTEC Conference, Dallas,TX.
|
[18]
|
Rueda, D.R .; Martinez-Salazar J. and Baltá-Calleja F. J; 1985, J. Mater. Sci., vol. 20,
pp. 834.
|
[19]
|
Balta Calleja, F. J.; Fakirov, S.; 1997, Trends Polym. Sci., vol. 5 (8), pp. 246.
|
[20]
|
Flores, A; Calleja, F. J. B.; Attenburrow, G. E.; Bassett, D. C.; 2000, Polymer, vol.
41, pp. 5431-5435.
|
[21]
|
Gulminea, J.V.; Janissekb, P. R.; Heisec, H. M. and Akcelrudd, L.; 2003, Polymer
Degradation and Stability, vol. 79, pp. 385–397.
|
[22]
|
Danjaji, I.D., Nawang, R.; Ishiaku, U.S.; Ismail, H.; Mohd Ishak, Z.A.M., 2002,
Polymer Testing, vol. 21, n 1, pp. 75-81, Elsevier Science Ltd.
|
[23]
|
Jurkowki, B. and Olkhov, Y. A.; Thermomechanical study of low-density
polyethylene, polyamide 6 and its blends, 2002, European polymer Journal, vol. 38, pp.1229-2044.
|
[24]
|
Janzen, J.; 1992, Polym.Eng. Sci., vol. 17, pp. 1242.
|