[1]
|
. X. Deng, W. L. Song, H. Zhang, P. Yan and A. H. Liu, “Friction and Wear Behaviours of the Carbide Tools Embedded with Solid Lubricants in Sliding Wear Tests and in Dry Cutting Processes,” Wear, Vol. 270, No. 9-10, 2011, pp. 666-674.
|
[2]
|
K. Kudou, T. Ono and S. Okada, “Crater Wear Characteristics of an Fe-Diffused Carbide Cutting Tool,” Journal of Materials Processing Technology, Vol. 132, No. 1, 2003, pp. 255-261.
doi:10.1016/S0924-0136(02)00936-6
|
[3]
|
X. Luo, K. Cheng, R. Holt and X. Liu, “Modeling Flank Wear of Carbide Tool Insert in Metal Cutting,” Wear, Vol. 259, No. 7-12, 2005, pp. 1253-1240.
doi:10.1016/j.wear.2005.02.044
|
[4]
|
D. K. Born and W. A. Goodman, “An Empirical Survey on the Influence of Machining Parameters on Tool Wear in Diamond Turning of Large Single-Crystal Silicon Optics,” Precision Engineering, Vol. 25, No. 4, 2001, pp. 247-257. doi:10.1016/S0141-6359(00)00069-6
|
[5]
|
S. Y. Liang and D. A. Dornfield, “Tool Wear Detection Using Time Series Analysis of Acounstic Emission,” Journal of Engineering for Industry, Vol. 111, No. 3, 1989, pp. 199-204. doi:10.1115/1.3188750
|
[6]
|
T. I. EI-wardany, D. Gao and M. A. Elbestawi, “Tool Condition Monitoring in Drilling Using Vibration Signature Analysis,” International Journal of Machine Tools and Manufacture, Vol. 36, No. 6, 1996, pp. 687-911. doi:10.1016/0890-6955(95)00058-5
|
[7]
|
W. B. Lee, C. F. Cheung, W. M. Chiu and L. K. Chan, “Automatic Supervision of Tool Wear Using Pattern Recognition Analysis,” International Journal of Machine Tools and Manufacture, Vol. 37, No. 8, 1997, pp. 1079- 1095. doi:10.1016/S0890-6955(97)88104-7
|
[8]
|
L. Wang, M. G. Mehrabi and E. Kannatey-Asibu Jr., “Hidden Markov Model-Based Tool Wear Monitoring in Turning,” Journal of Manufacturing Science and Engi- neering, Vol. 124, No. 3, 2002, pp. 651-658.
|
[9]
|
Y. Karpat and T. Ozel, “Mechanics of High Speed Cut- Ting with Curvilinear Edge Tools,” International Journal of Machine Tools & Manufacture, Vol. 48, No. 2, 2008, pp. 195-208. doi:10.1016/j.ijmachtools.2007.08.015
|
[10]
|
H. Saglam, S. Yaldiz and F. Unsacar, “The Effect of Tool Geometry and Cutting Speed on Main Cutting Force and Tool Tip Temperature,” Materials and Design, Vol. 28, No. 1, 2007, pp. 101-111.
doi:10.1016/j.matdes.2005.05.015
|
[11]
|
K. Bouacha, M. A. Yallese, T. Mabrouki and J. F. Rigal, “Statistical Analysis o Surface Roughness and Cutting Forces Using Response Surface Methodologie in Hard Turning of Ainsi 52100 Bearing Steel with CBN Tool,” International Journal of Refractory Metals & Hard Materials, Vol. 28, No. 3, 2010, pp. 349-361.
|
[12]
|
M. A. Yallese, K. Chaoui, N. Zeghib, L. Boulenouar and J. F. Rigal, “Hard Machining of Hardened Bearing Steel Using Cubic Boron Nitride Tool,” Journal of Materials Processing Technology, Vol. 209, No. 2, 2009, pp. 1092-1104. doi:10.1016/j.jmatprotec.2008.03.014
|
[13]
|
H. G?kkaya and M. Nalbant, “The Effects of Cutting Tool Geometry and Processing Parameters on the Surface Roughness of AISI 1030 Steel,” Materials and Design, 2005.
|
[14]
|
Lathing Tools, Sandvik Cormant, 2000.
www.sandvik.coromant.com
|
[15]
|
R. Pavel, et al., “Effect of Tool Wear on Surface Finish for a Case of Continuous and Interrupted Hard Turning,” Journal of Materials Processing Technology, Vol. 170, 2005. pp. 341-349. doi:10.1016/j.jmatprotec.2005.04.119
|
[16]
|
J. Wang, C. Z. Huang and W. G. Song, “The Effect of Tool Flank Wear on the Orthogonal Cutting Process and Its Practical Implications,” Journal of Materials Processing Technology, Vol. 142; 2003, pp. 338-346.
doi:10.1016/S0924-0136(03)00604-6
|