[1]
|
S. C. Singhal and K. Kendell, “High-temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications” Elsevier Science, Oxford, 2003.
|
[2]
|
T.-L. Wen, D. Wang, M. Chen, H. Z. Zhang, H. Nie and W. Huang, “Material Research for Planar SOFC Stack,” Solid State Ionics, Vol. 148, No. 3-4, 2002, pp. 513-519.
doi:10.1016/S0167-2738(02)00098-X
|
[3]
|
N. Sakai, T. Kawada, H. Yokokawa, M. Dokia and T. Iwata, “Sinterability and Electrical Conductivity of Calcium-Doped Lanthanum Chromiyes,” Journal of Materials Science, Vol. 25, No. 10, 1990, pp. 4531-4534.
doi:10.1007/BF00581119
|
[4]
|
N. Sakai, T. Horita, H. Yokokawa, M. Dokiya and T. Kawada, “Oxygen Permeation Measurement of La 1-xCaxCrO3-σ by Using an Electrochemical Method,” Solid State Ionics, 1996; Vol. 86-88, Part 2, pp. 1273-1278.
doi:10.1016/0167-2738(96)00300-1
|
[5]
|
T. Horita, K. Jamaji, M. Ishikawa, N. Sakai, H. Yokokawa and T. Kawada, “Active Sites Imaging for Oxygen Reduc- tion at La0.9 Sr0.1 MnO3-x/Yttria-Stabilized Zirconia Interface by Secondary-Ion Mass Spectrometry,” Journal of the Electrochemical Society, Vol. 145, No. 9, 1998, pp. 3196-3202.
|
[6]
|
J. Mizusaki, H. Tagawa, K. Naraya and T. Sasamoto, “Electronic Conductivity, Seebeck Coefficient, Defect and Electronic Structure of Nonstoichiometric La1-xSrx MnO3,” Solid State Ionics, Vol. 132, No. 3-4, 2000, pp. 167-180. doi:10.1016/S0167-2738(00)00662-7
|
[7]
|
S. P. Jiang, J. P. Zhang, Y. Ramaprakash, D. Milosevic and K. Wilshier, “An Investigation of Shelf-Life of Strontium Doped LaMnO3 Materials,” Journal of Materials Science, Vol. 35, No. 11, 2000, pp. 735-741.
doi:10.1023/A:1004766212164
|
[8]
|
S. P. Jiang, J. G. Love, J. P. Zhang, M. Hoang, Y. Ramaprakash and A. E. Hughes, “The Electrochemical Performance of LSM/Zirconia-Yttria Interface as a Function of a-Site Non-stoichiometry and Cathodic Current Treatment,” Solid State Ionics, Vol. 121, No. 1-4, 1999, pp. 1-10. doi:10.1016/S0167-2738(98)00295-1
|
[9]
|
P. Decorse, G. Caboche and L.-C. Dufour, “A Comparative Study of the Surface and Bulk Properties of Lanthanum-Strontium-Manganese Oxides La1?xSrxMnO3±δ as a Function of Sr-Content, Oxygen Potential and Temperature,” Solid State Ionics, Vol. 117, No. 1-2, 1999, pp. 161-169. doi:10.1016/S0167-2738(98)00260-4
|
[10]
|
Z. Tang, Y. Xie, H. Hawthorne and D. Ghosh, “Sol-Gel Processing of Sr0.5Sm0.5CoO3 Film,” Journal of Power Sources, Vol. 157, No. 1, 2006, pp. 385-388.
doi:10.1016/j.jpowsour.2005.07.041
|
[11]
|
B. C. H. Steele, “Appraisal of LCe1-yGdyO2-y/2 Electyrolytes for IT-SOFC Operation at 500?C,” Solid State Ionics, Vol. 129, No. 1-4, 2000, pp. 95-110.
doi:10.1016/S0167-2738(99)00319-7
|
[12]
|
E. B. Mitberg, M. V. Patrakeev, I. A. Leonidov, V. L. Kozhevnikov and K. R. Poeppelmeier, “High-Temperature Electrical Conductivity and Thermopower in Nonstoichiometric La1?xSrxCoO3?δ (x = 0.6),” Solid State Ionics, Vol. 127, No. 3-4, 2000, pp. 325-330.
doi:10.1016/S0167-2738(00)00670-6
|
[13]
|
C.-F. Kao and C.-L. Zheng, “Electrochemical Behaviour of Oxygen at Nickel Nest Cathodic Material with Catalyst La1?xSrxCoO3,” Solid State Ionics, Vol. 120, No. 1-4, 1999, pp. 163-171.
doi:10.1016/S0167-2738(98)00561-X
|
[14]
|
S. P. Simner, J. F. Bonnett, N. L. Canfield, K. D. Meinhardt, V. L. Sprenkle and J. W. Stevenson, “Optimized Lanthanum Ferrite-Based Cathodes for Anode-Supported SOFCs,” Electrochemical and Solid-State Letters, Vol. 5, No. 7, 2002, pp. 173-175.
|
[15]
|
A. Mai, V. A. C. Haanappel, S. Uhlenbruck, F. Tietz and D. Stover, “Ferrite-Based Perovskites as Cathode Materials for Anode-Supported Solid Oxide Fuel Cells: Part I. Variation of Composition,” Solid State Ionics, Vol. 176, No. 15-16, 2005, pp. 341-350.
doi:10.1016/j.ssi.2005.03.009
|
[16]
|
Y. Teraoka, H. M. Zhang, K. Okamoto and N. Yamazoe, “Mixed Ionic -Electronic Conductivity of La1-xSrxCo1-y Fe y O 3-σ Perovskite-Type Oxide,” Materials Research Bulletin, Vol. 23, No. 1, 1988, pp. 51-58.
doi:10.1016/0025-5408(88)90224-3
|
[17]
|
J. A. Kilner, R. A. De Souza and I. C. Fullarton, “Surface Exchange of Oxygen in Mixed Conducting Perovskite Oxide,” Solid State Ionics, Vol. 86-88, Part 2, 1996, pp. 703-709. doi:10.1016/0167-2738(96)00153-1
|
[18]
|
S. Tanasescu, N. D. Totir and I. Marchidan, “Thermodynamic Properties of Some Perovskite Type Oxide Used as SOFC Cathode Materials,” Solid State Ionics, Vol. 119, No. 1-4, 1999, pp. 311-315.
doi:10.1016/S0167-2738(98)00520-7
|
[19]
|
J. Holc, D. Ku??er, M. Hrovat, S. Bernik and D. Kolar, “Electrical and Microstructural Characterization of (La0.8Sr0.2) (Fe1-xAlx)O3 and (La0.8Sr0.2) (Mn1-xAlx)O3 as Possible SOFC Cathode Materials,” Solid State Ionics, Vol. 95, No. 3-4, 1997, pp. 259-268.
doi:10.1016/S0167-2738(96)00595-4
|
[20]
|
Z. P. Shao and S. M. Haile, “A High-Performance Cathode for the Next Generation of Solid Oxide Fuel Cells,” Nature, Vol. 431, 2004, pp. 170-173.
doi:10.1038/nature02863
|
[21]
|
Y. D. Zhen, A. I. Y. Tok, S. P. Jiang and F. Boey, “La(Ni,Fe)O3 as a Cathode Material with High Tolerance to Chromium Poisoning for Solid Oxide Fuel Cells,” Journal of Power Sources, Vol. 170, No. 1, 2007, pp. 61-66. doi:10.1016/j.jpowsour.2007.03.079
|
[22]
|
Y. D. Zhen, S. P. Jiang and A. I. Y. Tok, “Strategy of the Development of Cr-Tolerant Cathodes of Solid Oxide Fuel Cells,” ECS Transactions, Vol. 7, No. 1, 2007, pp. 263-269. doi:10.1149/1.2729100
|
[23]
|
S. Lee, Y. Lim, E. A. Lee, H. J. Hwang and J.-W. Moon, “Ba0.5Sr0.5C00.8Fe0.2O3-δ (BSCF) and La0.6Ba0.4C00.2Fe0.8O3-δ (LBCF) Cathodes Prepared by Combined Citrtate-EDTA Method for IT-SOFCs,” Journal of Power Sources, Vol. 157, No. 2, 2006, pp. 848-854.
doi:10.1016/j.jpowsour.2005.12.028
|
[24]
|
Y. Zhen and S. P. Jiang, “Characterization and Performance of (La,Ba)(Co,Fe)O3 Cathode for Solid Oxide Fuel Cells with Iron-Chromium Metallic Interconnect,” Journal of Power Sources, Vol. 180, No. 2, 2008, pp. 695-703.
doi:10.1016/j.jpowsour.2008.02.093
|
[25]
|
http://azom.com.details.asp?ArticleID=157
|
[26]
|
K. C. Wincewicz and J. S. Cooper, “Taxonomies of SOFC Material and Manufacturing Alternatives,” Journal of Power Sources, Vol. 140, No. 2, 2005, pp. 280-296.
|
[27]
|
M. Ghouse, A. Al-Musa, Y. Al-Yousef and M. F. Al-Otaibi, “Synthesis of Mg Doped LaCrO3 Nano Powders by Sol-Gel Process for Solid Oxide Fuel Cell Application,” Journal of New Materials for Electrochemical Systems, Vol. 13, No. 2, 2010, pp. 99-106.
|
[28]
|
M. Ghouse, Y. Al-Yousef, A. Al-Musa and M. F. Al-Otaibi, “Preparation of La0.6Sr0.4Co0.2Fe0.8O3 Nanoce- ramic Cathode Powders for Solid Oxide Fuel Cell (SOFC) Application,” International Journal of Hydrogen Energy, Vol. 35, No. 17, 2010, pp. 9411-9419.
doi:10.1016/j.ijhydene.2010.04.144
|
[29]
|
M. Ghouse, Y. Al-Yousef, A. Al-Musa and M. F. Al-Otaibi, “Preparation of La0.7Ca0.3CrO3 Nanoceramic Powders for Solid Oxide Fuel Cell (SOFC) Application,” World Journal of Engineering, Vol. 6, No. 1, 2009, pp. 149-155.
|
[30]
|
B. D. Cullity, “Elements of X-Ray Diffraction,” 2nd Edition, Addison-Wesley Publication Co., reading, 1978, p. 102.
|
[31]
|
R. D. Purohit, S. Saha and A. K. Tyagi “Nanocrystalline thoria Powders via Glycine-Nitrate Combustion,” Journal of Nuclear Materials, Vol. 288, No. 1, 2001, pp. 7-10.
doi:10.1016/S0022-3115(00)00717-0
|
[32]
|
http://www.advancedmaterials.us/S572726Sr.htm
|