[1]
|
S.J. Kim, C.G. Lee, I.C. Choi, Sunghak Lee, Effects of Heat Treatment and Alloying Elements on the Microstructures and Mechanical Properties of 0.15 Wt Pct C transformation-Induced Plasticity-Aided cold-Rolled Steel Sheets, Metall. Mater.Trans. A, Vol. 32A, (2001) 505.
|
[2]
|
P. Giorgio, C.C. Maria, Metallurgically Based Development of Dual Phase Thin Hot Strip, Acciaieria Arvedi S.P.A., Ceremona Italy, (22004) 1-2.
|
[3]
|
W. Saikaly, X. Bano, C. Issartel, G. Rigaut, The Effects of Thermomechanical Processing on the Precipitation in an Industrial Dual Phase Steel Microalloyed with Titanium, Metall.Trans. A, Volume 32A, (2001) 1939.
|
[4]
|
S.B. Pritchard, A.J. Trowsdale, Dual Phase Steel-High Strength Fasteners Without Heat Treatment, Corus Construction and Industrial, U.K., (2002) 1-10.
|
[5]
|
K. Hulka, Dual Phase and Trip Steels, ASM, Metal park Ohio, (2000) 1-4.
|
[6]
|
A. Bag, K.K. Ray, E.S Dwarakadasa, Influence of Martensite Content and Morphology on the Toughness and Fatigue Behaviour of High–Martensite Dual–Phase Steels, Metall. Mater.Trans. A, Vol. 32A, (2001) 2207-2213.
|
[7]
|
T. Waterscoot, L. Kestens, B.C. De Cooman, Hot Rolling Texture Development in CMnCrSi Dual Phase Steels, Metall. Mater.Trans. A, Vol. 33A, (2002) 1091.
|
[8]
|
N.D. Beynon, T.B. Jones, G. Fourlaris, Effect of Processing Parameters on the Deformation Behaviour of Low Carbon Dual Phase Strip Steel at High Strain Rates, MS&T Conference Proceedings, (2004) 459.
|
[9]
|
A.C. Barros, Microstructure and Mechanical Properties of a Microalloyed Steel after Thermal Treatments, Materials Research Journal, Vol.6, (2003) 118.
|
[10]
|
V. Raghavan, Physical Metallurgy: Principle and Practice, Prentice-Hall of India Ltd, Delhi, (1989) 97-98, 206-221.
|
[11]
|
G. R. Speich, Fundamentals of dual phase steels, New York: AIME, (1981) 3
|
[12]
|
X. Fang, Z. Fan, B. Ralph, P. Evans, R. Underhill, Effects of Tempering Temperature on Tensile and Hole Expansion Properties of a C-Mn Steel, Materials Processing Technology, 132 (2002) 217.
|
[13]
|
K. V. Sudhakar, E. S. Dwarakadasa, A Study of Fatigue Crack Growth in Dual Phase Martensitic Steel in Air Environment, Bull. Mater. Sci, Vol. 23, (2000) 193-199.
|