[1]
|
F. L. Litvin, D. Vecchiato, K. Yukishima, A. Fuentes, I. Gonzalez-Perez and K. Hayasaka, “Reduction of Noise of Loaded and Unloaded Misaligned Gear Drives,” Computer Methods in Applied Mechanics and Engineering, Vol. 195, No. 41-43, 2006, pp. 5523-5536.
doi:10.1016/j.cma.2005.05.055
|
[2]
|
M. ?kerblom, “Gear Noise and Vibration—A Literature Survey,” Stockholm, 2001, p. 26.
|
[3]
|
H. N. Ozguven and D. R. Houser, “The Mathematical Models Used in Gear Dynamics—A Review,” Journal of Sound and Vibration, Vol. 121, No. 3, 1988, pp. 383-411.
doi:10.1016/S0022-460X(88)80365-1
|
[4]
|
A. Parey and N. Tandon, “Spur Gear Dynamic Models Including Defects: A Review,” Shock Vibration Digest, Vol. 35, No. 6, 2003, pp. 465-78.
doi:10.1177/05831024030356002
|
[5]
|
Y. Tearuchi and M. Hidetaro, “Comparison of Theories and Experimental Results for Surface Temperature of Spur Gear Teeth,” Journal of Engineering for Industry, Transactions of the ASME, Vol. 96, No. 11, 1974, pp. 41-50.
|
[6]
|
K. Ichimaru and F. Hirano, “Dynamic Behavior of Heavy-Loaded Spur Gears,” Journal of Engineering for Industry, Transactions of the ASME, Vol. 96, No. 2, 1974, pp. 373-381.
|
[7]
|
K. L. Wang and H. S. Cheng, “Numerical Solution to the Dynamic Load, Film Thickness, and Surface Temperatures in Spur Gears—Part 2 Results,” Journal of Mechanical Design, Vol. 103, No. 4, 1981, pp. 188-194.
doi:10.1115/1.3254860
|
[8]
|
K. L. Wang, H. S. Cheng, K. L. Wang and H. S. Cheng, “Numerical Solution to the Dynamic Load, Film Thickness, and Surface Temperatures in Spur Gears—Part 1. Analysis,” Journal of Mechanical Design, Vol. 103, No. 4, 1981, pp. 177-187. doi:10.1115/1.3254859
|
[9]
|
S. M. A. Arikan, “Dynamic Load and Contact Stress Analysis of Spur Gears,” 17th Design Automation Conference presented at the 1991 ASME Design Technical Conferences, Miami, 1991, pp. 85-91.
|
[10]
|
J. H. Kuang and A. D. Lin, “The Effect of Tooth Wear on the Vibration Spectrum of a Spur Gear Pair,” Journal of Vibration and Acoustics-Transactions of the Asme, Vol. 123, No. 3, 2001, pp. 311-317. doi:10.1115/1.1379371
|
[11]
|
J. H. Kuang, A. D. Lin, J. H. Kuang and A. D. Lin, “Theoretical Aspects of Torque Responses in Spur Gearing Due to Mesh Stiffness Variation,” Mechanical Systems and Signal Processing, Vol. 17, No. 2, 2003, pp. 255-271. doi:10.1006/mssp.2002.1516
|
[12]
|
A. Andersson, “An Analytical Study of the Effect of the Contact Ratio on Spur Gear Dynamic Response,” Journal of Mechanical Design, Vol. 122, No. 4, 2000, pp. 508514. doi:10.1115/1.1320819
|
[13]
|
R. Kasuba and J. W. Evans, “An Extended Model for Determining Dynamic Loads in Spur Gearing,” Journal of Mechanical Design, Vol. 103, No. 2, 1981, pp. 398409. doi:10.1115/1.3254920
|
[14]
|
A. S. Kumar, T. S. Sankar and M. O. M. Osman, “On Dynamic Tooth Load and Stability a Spur-Gear System Using the State-Space Approach,” Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 107, No. 1, 1985, pp. 54-60. doi:10.1115/1.3258695
|
[15]
|
K. Cavdar, F. Karpat and F. C. Babalik, “Computer Aided Analysis of Bending Strength of Involute Spur Gears with Asymmetric Profile,” Journal of Mechanical Design, Vol. 127, No. 3, 2005, pp. 477-484.
|
[16]
|
A. Kapelevich, “Geometry and Design of Involute Spur Gears with Asymmetric Teeth,” Mechanism and Machine Theory, Vol. 35, No. 1, 2000, pp. 117-130.
doi:10.1016/S0094-114X(99)00002-6
|
[17]
|
F. Karpat and S. Ekwaro-Osire, “Influence of Tip Relief Modification on the Wear of Spur Gears with Asymmetric Teeth,” Tribology Transactions, Vol. 51, No. 5, 2008, pp. 581-588. doi:10.1080/10402000802011703
|
[18]
|
F. Karpat, S. Ekwaro-Osire and M. P. H. Khandaker, “Probabilistic Analysis of MEMS Asymmetric Gear Tooth,” Journal of Mechanical Design, Vol. 130, No. 4, 2008, pp. 042306.1-042306.6.
|
[19]
|
F. Karpat and S. Ekwaro-Osire, “Influence of Tip Relief Modification on the Wear of Spur Gears with Asymmetric Teeth,” Tribology & Lubrication Technology, Vol. 66, No. 6, 2010, pp. 50-60.
|
[20]
|
F. Karpat, S.Ekwaro-Osire, K.Cavdar and F.C. Babalik, “Dynamic Analysis of Involute Spur Gears with Asymmetric Teeth,” International Journal of Mechanical Sciences, Vol. 50, No. 12, 2008, pp. 1598-1610.
doi:10.1016/j.ijmecsci.2008.10.004
|
[21]
|
J. J. Coy and C. H. C. Chao, “Method of Selecting Grid Size to Account for Hertz Deformation in Finite Element Analysis of Spur Gears,” Journal of Mechanical Design, Vol. 104, No. 4, 1982, pp. 759-766.
doi:10.1115/1.3256429
|
[22]
|
R. Muthukumar and M. R. Raghavan, “Estimation of Gear Tooth Deflection by the Finite Element Method,” Mechanism and Machine Theory, Vol. 22, No. 2, 1987, pp. 177-181. doi:10.1016/0094-114X(87)90042-5
|