[1]
|
T. A. Khalifa and T. S. Mahmoud, Elevated Temperature Mechanical Properties of Al
alloy AA6063/SiCp MMCs, Proceedings of the World Congress on Engineering 2009
Vol II WCE 2009, July 1 – 3, London, U.K, ISBN: 978 -988 -18210-1-0.
|
[2]
|
M. Adiamak, Selected Properties of Aluminium Base Composite Reinforced with
Intermetallic Particles, Journal of Achievement in Materials and Manufacturing
Technology, Vol. 14, Issue1-2, 2006, Pp 43-47.
|
[3]
|
K. R. Ahmad, J. B. Shansul, L.B Hussain and Z. A. Ahmad, The effect of Reinforcement Particle Size on the Microstructure and Hardness of Al/Al2O3 Composite via Powder Metallurgy Route 2003, 12th Conference and 13th Annual General Meeting of the Electron Microscopy Society of Malaysia, Langkawi.
|
[4]
|
V. S. Aigbodion, Particulate Strengthened Al-Si/Alumino-Silicate Composite, Journal of Materials Science and Engineering A, Vol. 460-461, 2007, Pp 574-578.
|
[5]
|
T. V. Christy, N. Murugan, S. Kumar, Comparative Study on the Microstructure and
Mechanical Properties of Al6061/TiB2/12p, Journal of Minerals and Materials Characterization and Engineering, Vol. 9, No.1, 2010, Pp 57-65.
|
[6]
|
J. S. Kashan, The Effect of Artificial Aging on Mechanical Properties of Metal Matrix
Composite, Engineering and Technology Journal, Vol. 28, No. 2, 2010, 282 – 288.
|
[7]
|
M. Kok, Production and Mechanical Properties of Al2O3 particle reinforced 2024 Aluminium Composites, Journal of Materials Processing Technology, Vol.16, 2005, Pp 381 – 387.
|
[8]
|
G. B. V. Kumar, C. S. P. Rao, N. Selvary, and M. S. Bhagyashekar, Studies on Al7075-Al2O3 Metal Matrix Composites. Journal of Minerals and Materials Characterization and Engineering, Volume 9, No. 1, 2010, Pp 43-45.
|
[9]
|
O. Omodara and E. C. Onwujiobi, Production and Mechanical Behaviour of Silicon
Carbide Reinforced Al (6063) Alloy Particulate Composites, 2010, B.Eng Thesis: Federal University of Technology, Akure, Nigeria.
|
[10]
|
Y. L. Saraswathi, S. Das, D. P. Mondal, Influence of Microstructure and Experimental
Parameters on the Erosion – Corrosion Behaviour of Al (alloy) Composites, Materials
Science and Engineering A, 425(2006): 244 – 254.
|
[11]
|
Z. Yussof, K. R. Ahmad, and S. B. Jamaludin, Comparative Study of Corrosion Behavior of AA 2014/15vol%Al2O3p and AA2009/20Vol% SiCw” Portugaliae Electrochemica Acta, Vol. 26, 2008, pp 291-301.
|
[12]
|
ASTM Standards, Metals Test Methods and Analytical Procedures, vol. 3.02, Wear and Erosion; Metal Corrosion, G31, 1994, p. 104.
|
[13]
|
J. Zhu and L. H. Hihara, Corrosion of continuous Alumina-fibre reinforced Al 2wt.% Cu-T6 metal matrix composite in 3.15wt.% NaCl Solution, Corrosion Science, Vol.52, 2010, 406 – 415.
|
[14]
|
M. Tandler, B. Sustarsic, L. Vehovar, Torkar M. Corrosion of Al/SiC Metal-Matrix
Composites, Mater Techno, 34(6) (2000) 353 – 358.
|
[15]
|
P. C. R. Nunes and L. V. Ramanathan, Corrosion behavior of alumina–aluminium and
silicon carbide–aluminium metal–matrix composites, Corrosion 51 (1995) 610–617.
|
[16]
|
D. G. Kolman and Butt, Journal of Electrochemical Society, Vol. 130, No.11, 1997, Pp 3785-3791.
|
[17]
|
J. M. G. De-Salazaar, A. Urena, S. Manzabedo, M. I. Barrena, Corrosion Behavior of
AA6061 and AA7075 Reinorced with Al2O3 Particles in Aerated 3.5% Chloride Solution, Potentiodynamic Measurement and Microstructure Evaluation, Corrosion Science, Volume 41, 1999, pp 529-545.
|
[18]
|
Abdul-Jameel, H. P. Nagaswararpa, P. V. Krupakara, and T. R. Shashi Shekar,
Evaluation of Corrosion Rate of Al6061/ Zircon Metal Matrix Composite in Sea Water, International Journal of Ocean and Oceanography, Vol. 3, No. 1, 2009, pp. 37-42.
|
[19]
|
L. H. Hihara, Corrosion of Metal Matrix Composite” ASM Handbook Vol. 13B,
Corrosion: Materials, S.D Craner and B.S., Covino Jr Ed., ASM International, 2005, pp. 526-524.
|
[20]
|
Z. M. Gasem and M. Al- Qutub, Corrosion Behavior of Powder Metallurgy Aluminium Alloy 6061/Al2O3 Metal Matrix Composite” 6th Saudi Engineering Conference KFUPM, Dhahran, Volume 5, 2008, pp. 270-280.
|
[21]
|
B. Bobic, S. Mitrovic, M. Bobic, and I. Bobic, Corrosion of Metal Matrix Composites
with Aluminium Alloy Substrate, Tribology in Industry, Volume 32, No. 1, 2010, pp. 3-11.
|