[1]
|
M. C. C. de S. e B. de Moraes and C. Elias, “Mechanical Prop-erties of Alumina-Zirconia Composites for Ceramic Abutments,” Journal of Materials Research, Vol. 7, No. 4, 2004, pp. 643-649.
|
[2]
|
A. Hirvonen, R. Nowak, Y. Yamamoto, T. Sekino, “Fabrication, Structure, Mechanical and Thermal Properties of Zirconia-Based Ceramic Nanocomposites,” Journal of the European Ceramic Society, Vol. 26, No. 3, 2006, pp. 1497-1505. doi:10.1016/j.jeurceramsoc.2005.03.232
|
[3]
|
J. W.-C. Wei, H. C. Kao and M. H. Lo, “Phase Transformation and Grain Coarsening of Zirconia/Mullite Composites,” Journal of the European Ceramic Society, Vol. 16, No. 2, 1996, pp. 239-247. doi:10.1016/0955-2219(95)00157-3
|
[4]
|
W. Pyda, “Mi-crostructure and Properties of Zirconia-Based Nanocomposites Derived from a Powder Containing TiC Crystallised in Situ and Carbon,” Ceramics International, Vol. 30, No. 3, 2004, pp. 333-342. doi:10.1016/S0272-8842(03)00105-6
|
[5]
|
G. Anne, S. Put, K. Vanmeensel and D. T. Jiang, “Hardness, Tough and Strong ZrO2-WC Composites from Nanosized Powders,” Jour-nal of the European. Ceramic Society, Vol. 25, No. 1, 2005, pp. 55-63. doi:10.1016/j.jeurceramsoc.2004.01.015
|
[6]
|
S.-Q. Liang, J. Zhong, X.-P. Tan and Y. Tang, “Mechanical Properties and Structure of Zirconia-Mullite Ceramics Prepared by In-situ Controlled Crystallization of Si-Al-Zr-O Amorphous Bulk,” Transaction of Nonferrous Metals Society of China, Vol. 18, No. 4, 2008, pp. 799-803. doi:10.1016/S1003-6326(08)60138-7
|
[7]
|
S.-Q. Liang, J. Zhong, X.-P. Tan and Y. Tang, “Prepara-tion of Mullite-Zirconia Composites with Ultra Fine Grains Ceramics by In-situ Controlled Crystallization from Si-Al-Zr-O Amorphous Bulk,” Nanoscience, Vol. 11, No. 1, 2006, pp. 32-37.
|
[8]
|
G. D. Zhan, T. R. Lai., J. L. Shi, T. S. Yen, Y. Zhou and Y. Z. Zhang, “Microstructure and Mechanical Properties of Yttria Stabilized Tetragonal Zirconia Polycrystal Containing Dispersed TiC Particles,” Journal of Materials Science, Vol. 31, No. 11, 1996, pp. 2903-2907. doi:10.1007/BF00356000
|
[9]
|
K. Haberko, W. Pyda, Z. Pedzich and M. M. Bucko, “A TZP Matrix Composite with in Situ Grown TiC Inclusions,” Journal of the European. Ceramic Society, Vol. 20, No. 14-15, 2000, pp. 2649-2654. doi:10.1016/S0955-2219(00)00159-X
|
[10]
|
R. H. J. Hannink, “Nanostructure Control of Materials,” CRC Press, Boca Raton, 2006. doi:10.1533/9781845691189
|
[11]
|
W. Acchar, “Microstructure of Alumina Reinforced with Tungsten Carbide,” Journal of Materials Science, Vol. 41, No. 11, 2006, pp. 3299-3302. doi:10.1007/s10853-005-5457-z
|
[12]
|
S. M. L. Nai, J. V. M. Kuma, M. E. Alam, X. L. Zhong, P. Babaghorbani and M. Gupta, “Using Microwave-Assisted Powder Metallurgy Route and Nano-Sized Reinforcement to Develop High-Strength Solder Composites,” Journal of Materials Engineering and Performance, Vol. 19, No. 3, 2009, pp. 335-341. doi:10.1007/s11665-009-9481-z
|
[13]
|
J. C. Han, C. Q. Hong, X. H. Zhang, J. Du, W. Zhang, “Highly Porous ZrO2 Ceramics Fabricated by a Camphene-Based Freeze-Casting Route: Mi-crostructure and Properties,” Journal of the European Ceramic Society, Vol. 30, No. 1, 2010, pp. 53-60. doi:10.1016/j.jeurceramsoc.2009.08.018
|