[1]
|
M. K. Suprappa, “Aluminum Matrix Composites: Challenges and Opportunities,” Sadhana, Vol. 28, No. 1-2, 2003, pp. 319-334. doi:10.1007/BF02717141
|
[2]
|
Http:/umewww.epf/ch/people/cayron/Fichiers/thesebook-hap.2pdf.
|
[3]
|
G. Curran, “MMCs, The Future,” Materials World, Vol. 6, No. 1, 1998, pp. 21-22.
|
[4]
|
M. Gupta, “Recycling of Aluminum Based Composite using Disintegrated Melt Deposition Technique,” National University of Singapore, Engineering Research, Vol. 23, No. 1, 2008.
|
[5]
|
ASM Committee on Gas Carburizing, “Carburizing and Carbonitriding,” American Society for Metals, 1977, pp. 6-20.
|
[6]
|
J. W. Martin, “Precipitation Hardening,” Second Edition, Butterworth Heinemann, 1998.
|
[7]
|
R. A. Higgins, “Properties of Engineering Materials,” 5th Edition, Hodder and Stoughton, London, 1983.
|
[8]
|
S. B. Hassan, O. Aponbiede and V. S. Aigbodion, “Precipitation Hardening Characteristics of Al-Si-Fe/SiC Particulate Composite,” Journal of Alloys and Compounds, Vol. 466, No. 1-2, 2008, pp. 268-272.
doi:10.1016/j.jallcom.2007.11.023
|
[9]
|
S. B. Hassan and V. S. Aigbodion, “The Effect of Thermal Ageing on Microstructure and Mechanical Properties of Al-Si-Fe/Mg Alloys,” Journal of Alloys and Compounds, Vol. 486, No. 1-2, 2009, pp. 309-314.
doi:10.1016/j.jallcom.2009.06.131
|
[10]
|
G. E. Dieter, “Mechanical Metallurgy,” 3rd Edition, MCgraw-Hill Book Company, London, 1988.
|
[11]
|
M. H. Mohammad, T. M. Ahmad, M. H. Adel and T. H. Mohammad, “The Effect of Time, Percent of Copper and Nickel on Naturally Aged Al-Cu-Ni Cast Alloys,” JMMCE, Vol. 11, No. 2, 2012, pp. 117-131.
|
[12]
|
O. A. Alo, L. E. Umoru, J. A. Ajao and K. M. Oluwasegun, “Thermal, Hardness, and Microstructural Characterization of Al-Si-SiCp Composites,” JMMCE, Vol. 11, No. 2, 2012, pp. 159-168.
|