[1]
|
F. Alizon, K. Khadke, H. J. Thevenot, J. K. Gershenson, T. J. Marion, S. B. Shooter, and T. W. Simpson, “Frameworks for product family design and development,” Concurrent Engineering, Vol. 15, No. 2, pp. 187–199, 2007.
|
[2]
|
D. M. Andersen, “Design for manufacturability & concurrent engineering,” Lafayette, CIM Press, CA, 2003.
|
[3]
|
E. K. Antonsson & J. Cagan, eds., “Formal engineering design synthesis,” Cambridge University Press, Cambridge, UK, 2001.
|
[4]
|
J. C. Borg, X. Yan, and N. P. Juster, “Exploring decisions’ influence on life-cycle performance to aid ‘design for Multi-X’,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 14, pp. 91–113, 2000.
|
[5]
|
J. P. Clarkson & C. Eckert, (Eds.) “Design process improvement - a review of current practice,” Springer, ISBN: 1-85233-701-X, 2005.
|
[6]
|
C. L. Dym and P. Little, “Engineering design: A project-based introduction,” Wiley and Sons, 2003.
|
[7]
|
J. S. Gero, (eds.) “Artificial intelligence in design’02,” Kluwer, Dordrecht, 2002.
|
[8]
|
K. Otto & K. Wood, Product Design, Prentice Hall. 2000.
|
[9]
|
G. Pahl & W. Beitz, “Engineering design: A systematic approach,” Springer, 1995.
|
[10]
|
D. Ullman, The Mechanical Design Process, Mac Graw Hill, 2002.
|
[11]
|
K. T. Ulrich & S. D. Eppinger, Product Design & Deve- lopment, Mac Graw Hill, 2000.
|
[12]
|
S. Filippi & I. Cristofolini, “The design guidelines (DGLs), a knowledge based system for industrial design developed accordingly to ISO-GPS (geometrical product specifications) concepts,” Research in Engineering Design, Vol. 18, No. 1, pp. 1–19, 2007.
|
[13]
|
R. M. Baecker, “Readings in groupware and computer- supported cooperative work,” San Francisco, CA, Morgan Kaufmann Publishers, Inc, 1993.
|
[14]
|
R. Crabtree, M. S. Fox, and N. Baid, “Case studies of coordination activities and problems in collaborative design,” Research in Engineering Design, Vol. 9, No. 2, pp. 70–84, 1997.
|
[15]
|
A. H. B. Duffy, M. M. Andreasen, and F. J. O’Donnell, “Design co-ordination,” Proceedings of International Conference on Engineering Design (ICED'99), Vol. 1, pp. 113–118, 1999.
|
[16]
|
R. Houssin, A. Bernard, P. Martin, G. Ris, F. Cherrier, “Information system based on a working situation model for a new design approach in concurrent engineering,” Journal of Engineering Design, Vol. 17, No. 1, pp. 35–54. 2006.
|
[17]
|
H. Hung, H. Kao, and K. Ku, “Evaluation of design alternatives in collaborative development and production of modular products,” the International Journal of Advanced Manufacturing Technology, Vol. 33, pp. 1065–1076, 2007.
|
[18]
|
Y. E. Nahm & H. Ishikawa, “Integrated product and process modeling for collaborative design environment,” Concurrent Engineering, Vol. 12, No. 1, pp. 5–23, 2004.
|
[19]
|
P. Wilson, “Computer supported cooperative work: an introduction,” Kluwer Academic Publishers, 1991.
|
[20]
|
Z. Wu & A. Duffy, “Mutual knowledge evolution in team design,” Workshop on Learning and Creativity, 7th Inter- national Conference on Artificial Intelligence in Design (AID’02), Cambridge, UK, 2002.
|
[21]
|
C. Bandera, I. Cristofolini, and S. Filippi, “Customizing a knowledge-based system for design optimization in fused deposition modeling RP-technique,” AMST’05 Seventh International Conference on Advanced Manufacturing Systems and Technology, Springer Wien-New York, pp. 607–616, 2005.
|
[22]
|
I. Cristofolini, S. Filippi, and C. Bandera, “How rapid prototyping process parameters could affect the product design phase: a KBS approach,” Proceedings IDETC/CIE 2006 - ASME International Design Engineering Technical Conferences & Computers and Information In Engin- eering Conference DETC 2006, Philadelphia, PA, ISBN 0-7918-3784-X, 2006.
|
[23]
|
S. Filippi, C. Bandera, and G. Toneatto, “Generation and testing of guidelines for effective rapid prototyping activities,” Proceedings of “XII ADM International Con- ference on Design Tools and Methods in Industrial Engineering”, Italy, 2001.
|
[24]
|
“Draft federal information processing standards, FIPS PUB 183,” Standard for Integration Definition for Function Modeling (IDEF0), National Institute of Standards and Technology, Gaithersburg, MD, USA, 1993.
|
[25]
|
P. F. Jacobs, “Stereolithography and other RP&M tech- nologies,” American Society of Mechanical Engineers, New York, 1996.
|
[26]
|
D. T. Pham and S. S. Dimov, “Rapid manufacturing,” Springer, Berlin Heidelberg, New York, 2001.
|
[27]
|
I. Raja, I. Vinesh, I. Fernandes and J. Kiran, Reverse engineering - An industrial perspective,” Spinger-Verlag London, 2008.
|
[28]
|
P. S. Banerjee, A. Sinha, and M. K. Banerjee, “A study on effect of variation of SLA process parameters over strength of built model,” Proceedings of the 2nd National Symposium on Rapid Prototyping & Rapid Tooling Tech- nologies, pp. 79–84, 2002.
|
[29]
|
H. S. Byun and K. H. Lee, “A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method,” the International Journal of Advanced Manufacturing Technology, Vol. 26, pp. 1338– 1347, 2005.
|
[30]
|
W. Cheng, J. Y. H. Fuh, A.Y. C. Nee, Y. S. Wong, and T. Miyazawa, “Multi-objective optimization of part building orientation in stereolithography,” Rapid Prototyp Journal, Vol. 1, No. 4, pp. 12–23, 1995.
|
[31]
|
K. Chockalingam, N. Jawahar, K. N. Ramanathan, and P. S. Banerjee, “Optimization of stereolithography process parameters for part strength using design of experiments,” the International Journal of Advanced Manufacturing Technology, DOI 10.1007/ s00170- 004-2307-0, 2005.
|
[32]
|
R. Harris, N. Hopkinso, H. Newlyn, R. Hague, and P. Dickens, “Layer thickness and draft angle selection for stereolithography injection mould tooling,” International Journal of Production Research, Vol. 40, No. 3, pp. 719– 729, 2002.
|
[33]
|
I. Horv′ath, J. J. Broek, Z. Rus′ak, G. Kuczogi, and J. S. M. Vergeest, “Morphological segmentation of objects for thick-layered manufacturing,” Proceedings of the 1999 ASME Conference on Design for Manufacturing,” Las Vegas, pp. 18–24, 1999.
|
[34]
|
S. H. Masood and A. Soo, “A rule based expert system for rapid prototyping system selection,” Robot Computer Integrated Manufacturing, Vol. 18, pp. 267–274, 2002.
|
[35]
|
X. Qian and D. Dutta, “Feature based fabrication in layered manufacturing,” Transactions on ASME Journal Mechanism Design, Vol. 123, No. 3, pp. 337–345, 2001.
|
[36]
|
A. Rosochowski and A. Matuszak, “Rapid tooling: The state of the art,” Journal of Materials Processing Technologies, Vol. 106, pp. 191–198, 2000.
|
[37]
|
Y. Tang, H. T. Loh, J. Y. H. Fuh, Y. S. Wong, and S. H. Lee, “An algorithm for disintegrating large and complex rapid prototyping objects in a CAD environment,” International Journal of Advanced Manufacturing Technology, Vol. 25, 895–901, 2005.
|
[38]
|
R. E. Williams, S. N. Komaragiri, V. L. Melton, R. R. Bishu, “Investigation of the effect of various build methods on the performance of rapid prototyping (stereolithography),” Journal of Materials Processing Technology, Vol. 61, pp. 173–178. 1996.
|