[1]
|
L. Svarovsky, “Solid-Liquid Separation, Chemical Engineering Series,” 4th Edition, Butterworths, London, 2000.
|
[2]
|
B. Wang and A. B. Yu, “Numerical Study of Particle-Fluid Flow in Hydrocyclones with Different Body Dimensions,” Minerals Engineering, Vol. 19, No. 10, 2006, pp. 1022-1033.
doi:10.1016/j.mineng.2006.03.016
|
[3]
|
T. Husveg, O. Rambeau, T. Drengstig and T. Bilstad, “Performance of Deoling Hydrocyclone during Variables Flow Rates,” Minerals Engineering, Vol. 20, No. 4, 2007, pp. 368-379. doi:10.1016/j.mineng.2006.12.002
|
[4]
|
L. G. M. Vieira, J. J. R. Damasceno and M. A. S. Barrozo, “Improvement of Hydrocyclone Separation Performance by Incorporating a Conical Filtering Wall,” Chemical Engineering and Process, Vol. 49, No. 5, 2010, pp. 460- 467. doi:10.1016/j.cep.2010.03.011
|
[5]
|
K. A. Hashmi, H. A. Hamza and J. C. Wilson, “CAN- MET Hydrocyclone: An Emerging Alternative for the Treatment of Oily Waste Streams,” Minerals Engineering, Vol. 17, No. 5, 2004, pp. 643-649.
doi:10.1016/j.mineng.2004.01.019
|
[6]
|
V. Krishna, R. Sripriya, V. Kumar, S. Chakraborty and B. C. Meikap, “Identification and Prediction of Air Core Diameter in a Hydrocyclone by a Novel Online Sensor based on Digital Signal Processing Technique,” Chemical Engineering and Process, Vol. 49, No. 2, 2010, pp. 165-176. doi:10.1016/j.cep.2010.01.003
|
[7]
|
M. J. Doby, A. F. Nowakowski, I. Yiu and T. Dyakowski, “Understanding Air Core Formation in Hydrocyclones by Studying Pressure Distribution as a Function of Viscosity,” Journal of Mineral Processing, Vol. 86, No. 1-4, 2008, pp. 18-25. doi:10.1016/j.minpro.2007.09.002
|
[8]
|
P. Bamrungsri, C. Puprasert, C. Guigui, P. Marteil, P. Bréant and G. Hérbrad, “Development of a Simple Experimental Method for the Determination of the Liquid Field Velocity in Conical and Cylindrical Hydrocyclones,” Minerals Engineering Research and Design, Vol. 86, No. 11, 2008, pp. 1263-1270.
|
[9]
|
J. S. Souza, “Numerical Study of Thermo Fluid Dynamic Separation of Heavy Oils Oily Waters of a Stream by Hydrocyclone,” Master’s Thesis, Federal University of Campina Grande, Brazil, 2009.
|
[10]
|
B. Wang, D. L. Xu, G. X. Xiao, W. E. K. Chu and A. B. Yu, “Numerical Study of Gas-Solid Flow in a Cyclone Separator,” Third International Conference on CFD in the Mineral and Process Industrial, Melbourne, 10-12 December 2003, pp. 371-376.
|
[11]
|
M. Narasimha, M. Brennan and P. N. Holthman, “A Review of CFD Modeling for Performance Predictions of Hydrocyclone,” Engineering Applications of Computational Fluid Mechanics, Vol. 1, No. 2, 2007, pp. 109-125.
|
[12]
|
H. F. Meier and M. Mori, “Gas-Solid Flow in Cyclones: The Eulerian-Eulerian Approach,” Computers Chemical Engineering, Vol. 22, Suppl. 1, 1998, pp. S641-S644.
doi:10.1016/S0098-1354(98)00114-8
|
[13]
|
ANSYS CFX, “User Manual Theory,” USA, 2006.
|
[14]
|
T. Babadagli and A. Al-Bemani, “Investigations on Matrix Recovery during Steam Injection into Heavy-Oil Containing Carbonate Rocks,” Journal Petroleum Science and Engineering, Vol. 58, No. 1-2, 2007, pp. 259- 274. doi:10.1016/j.petrol.2007.01.003
|
[15]
|
R. B. Xiang and K. W. Lee, “Numerical Study of Flow Field in Cyclones of Different Height,” Chemical Engineering and Process, Vol. 44, No. 8, 2005, pp. 877-883.
doi:10.1016/j.cep.2004.09.006
|
[16]
|
H. Yoshida, T. Takashina, K. Fukuia and T. Iwanaga, “Effect of Inlet Shape and Slurry Temperature on the Classification Performance of Hydrocyclones,” Powder Technology, Vol. 140, No. 1-2, 2004, pp. 1-9.
doi:10.1016/j.powtec.2003.12.006
|
[17]
|
J. J. Cilliers, L. Diaz-Anadon and F. S. Wee, “Temperature, Classification and Dewatering in 10 mm Hydrocyclones,” Minerals Engineering, Vol. 17, No. 5, 2004, pp. 591-597. doi:10.1016/j.mineng.2003.11.022
|
[18]
|
M. A. Bennett and R. A. Williams, “Monitoring the Operation of an Oil/Water Separator Using Impedance Tomography,” Minerals Engineering, Vol. 17, No. 5, 2004, pp. 605-614. doi:10.1016/j.mineng.2004.01.021
|