[1]
|
T. Gladman, “The Physical Metallurgy of Microalloyed Steels”, 1st ed., The Institute of Materials, London, 1997.
|
[2]
|
M.A. Meyers, “Dynamic Behavior of Materials”, John Wiley & Sons, New York, 1994.
|
[3]
|
K.M. Cho, S. Lee, S.R. Nutt, and J. Duffy, “Adiabatic Shear Band Formation During Dynamic Torsional Deformation of an HY-100 Steel”, Acta Materialia, Vol. 41, 1993, pp. 923-932.
|
[4]
|
W.-S. Lee, and C.-Y. Liu, “Comparison of Dynamic Compressive Flow Behavior of Mild and Medium Steels over Wide Temperature Range”, Metallurgical and Materials Transactions A, Vol. 36A, 2005, pp. 3175-3186.
|
[5]
|
M.A. Meyers, R.W. Armstron, and H.O.K. Korchner, “Mechanics and Materials – Fundamentals and Linkages”, John Wiley & Sons, New York, 1999.
|
[6]
|
J.D. Campbell, and W.G. Ferguson, “The Temperature and Strain Rate Dependence of the Shear Strength of Mild Steel”, Philosophical Magazine, Vol. 21, 1970, pp. 63-82.
|
[7]
|
Y. Bai, and B. Dodd, “Adiabatic Shear Localization - Occurrence, Theories and Applications”, Pergamon Press, New York, 1994.
|
[8]
|
S. Vaynman, M.E. Fine, S. Lee, and H.D. Espinosa, “Effect of Strain Rate and Temperature on Mechanical Properties and Fracture Mode of High Strength Precipitation Hardened Ferritic Steels”, Scripta Materialia, Vol. 55, 2006, pp. 351-354.
|
[9]
|
A. Smith, H. Luo, D.N. Hanlon, J. Sietsma, and S. van der Zwaag, “Recovery Processes in the Ferrite Phase in C-Mn Steel”, ISIJ International, Vol. 44, 2004, pp. 1188- 1194.
|
[10]
|
A.G. Odeshi, M.N. Bassim, S. Al-Ameeri, and Q. Li, “Dynamic Shear Band Propagation and Failure in AISI 4340 Steel”, Journal of Materials Processing Technology, Vol. 169, 2005, pp. 150-155.
|