[1]
|
Everett R.K and Arsenault R.J. “Metal Matrix Composites: Mechanisms and
Properties”, 1991 (Academic Press, San Diego).
|
[2]
|
Kocjak M.J., Kahtri S.C., Allison J.E and Jones J.W., “Fundamentals of Metal Matrix
Composites” (Ed S.Suresh, A.Mortensen and A.Needleman, 1993 (Butterworth-
Heinemann, Boston)).
|
[3]
|
Lloyd D.J. and Brotzen F.R., “Particle reinforced aluminium and Mg matrix
composites” Int. Mater. Rev; 1994, 39,1-39.
|
[4]
|
Lei M. and Ledbetter H., “Communications: elastic constants of SiCp/Al: measurements
and modeling”, Metall. Mater. Trans., 1994, 25A, 2832-2835.
|
[5]
|
Vogelsang M., Arsenault R. J. and Fisher R. M., “In-situ HVEM study of dislocation
generation at Al/SiC interfaces”, Metall. Trans. A, 1986, 17, 379.
|
[6]
|
Pai B. C., Ray S., Prabhakar, K. V. and Rohatgi P. K., “Fabrication of aluminiumalumina
(magnesia) particulate composites in foundries using magnesium additions to
the melts”, Mater. Sci. Engng, 1976,24,31.
|
[7]
|
Sato A. and Mehrabian R., “Aluminium matrix composites: fabrication and properties”,
Metall. Trans. B, 1976, 7, 443.
|
[8]
|
Biswas S., Santharam A., Rao N.A.P Narayanaswamy, K. Rohatgi, P. and Biswas S. K.
Tribology International 1980, 8, 171.
|
[9]
|
Pai B. C., Pillai R.M. and Sathyanarayana K.G, “Prospects for graphite aluminium
composites in engineering industries” Indian Journal of Engineering and Materials
Science 1994, 1, October, 279.
|
[10]
|
Krishnan B.P., Raman N., Narayanaswamy K and Rohtagi P.K. Wear, 1980, 60, 1.
|
[11]
|
Bragg W. L., “Introduction to Crystal Analysis”, Bell and Son London, 1928, p. 64.
|
[12]
|
Pillai U. T. S., Pandey R. K. and Nagam K. D. P., “Deformation and fracture of
aluminium graphite and aluminium zircon particulate composites” Proc of the 5th
International Conference on Composite Materials. TMS Publications, 1985, p. 895.
|
[13]
|
Awerbuch J., Goering J. and Busking K., “In Mini Mechanics Analysis and Testing of
Short Fibre Composites: Experimental Methods and Results”, Vol. 121, 1988. pp964
(American Society for Testing and Materials, Philadelphia. Pennsylvania).
|
[14]
|
Smith W. F, “Structure and Properties of Engineering Alloys”, 2nd edn, McGraw-Hill,
New York, 1993, p. 566.
|
[15]
|
Badia F. A., McDonald D. F. and Pearson J. R. Trans. AFS 1971, 79, 269.
|
[16]
|
Biswas S., Dwarakadasa E. and Biswas S. K, “Bearings and wear properties of cast
graphite aluminium composites”, Proc. of All India Seminar on Aluminium, 1979.
|
[17]
|
C.S. Ramesh, R. Keshavamurthy, B.H. Channabasappa, Abrar Ahmed, “Microstructure
and mechanical properties of Ni–P coated Si3N4 reinforced Al6061 composites”
Materials Science and Engineering A 502 (2008) 99–106.
|
[18]
|
A. Ramesh, J. N. Prakash, A. S. Shiva Shankare Gowda and Sonnappa Appaiah
“Comparison of the Mechanical Properties of AL6061/Albite and AL6061/Graphite
Metal Matrix Composites” Journal of Minerals & Materials Characterization &
Engineering, Vol. 8, No.2, pp 93-106, 2009.
|
[19]
|
K.H.W Seah, S.C.Sharma, B.M.Girish, “Mechanical properties of cast ZA-27/graphite
particulate composites”, Materials and Design, 1995,16, 271- 275.
|
[20]
|
Pillai U. T. S and Pandey R. K, “Studies on mechanical behaviour of cast and forged
aluminium graphite particle composites”, Journal of Composite Materials 1989, 23,
February, 108.
|
[21]
|
Dieter G. E, “Mechanical Metallurgy”, SI metric edition, McGrawHill, New York,
1988, pp. 212-19.
|
[22]
|
Ghosh P. K. and Ray S. J. Mater. Sci., 1986, 21, 1167.
|
[23]
|
McCoy J. M., Prones C. and Warner F. E. 1. Mater. Sci., 1988, 1, 37.
|
[24]
|
McDanels D. L., “Analysis of stress-strain, fracture and ductility behaviour of
aluminium matrix composites containing discontinuous SiC reinforcement”, Metall.
Trans. A, 1985, 16, 1105-1115.
|
[25]
|
Rohatgi P. K., Ray S. and Lin Y, “Tribological properties of metal matrix graphite
particle composites”, International Materials Review, 1992, 37, No.3, 129.
|
[26]
|
Beitz W. and Kuttner K. H. (Eds) Dubbel Handbook of Mechanical Engineering, 1994,
p. D8 (Springer-Verlag, London).
|
[27]
|
Zhu H. X. and Liu S. K, “Mechanical properties of squeeze cast zinc alloy matrix
composites containing alpha-alumina fibers” Composites, 1993, 24(6), 437.
|
[28]
|
Mummery P. M., Derby B. and Scruby C. B, “Acoustic emission from particulate
reinforced metal matrix composites”, Acta Metall., 1993,41,1431.
|
[29]
|
Webster D. Metall. Trans. A, 1982, 13A, 511.
|
[30]
|
Towle D. J. and Fried C. M, “Comparison and compressive and tensile properties of Mg
based MMCs”, J. Mater. Sci. Technol., January 1993, 9, 35-41.
|